BRAD PENN® PENN-GRADE 1® Partial Synthetic SAE 20W-50 High Performance Oil
Designed to offer higher performance engines the cold temperature operational benefits of an SAE ‘20W’ engine oil while providing the desired film strength; sealing abilities; bearing, crankshaft, piston ring and valvetrain component anti-wear protection of an SAE 50 weight oil at normal engine operating temperatures.
BRAD PENN® PENN-GRADE 1® High Performance Oils
PENN-GRADE 1® High Performance Oils are specially formulated using high quality PENN-GRADETM base stocks and select additive technologies to meet the stringent lubricating demands of high-performance, highly stressed, street and racing engines. They deliver excellent shock load and high temperature protection to heavily stressed engine parts including bearings, camshafts, rings, and pistons. They reduce internal friction allowing for increased horsepower output while maintaining their strong lubricating film protection even under the most demanding torque and extreme temperature conditions. These high performance formulations also provide excellent antifoaming and shear stability characteristics, exceptional high temperature protection from thermal breakdown, superior film strength, and strong anti wear properties.
The Brad Penn® Penn Grade 1® High Performance Oils contain the higher level of anti-wear (ZDDP – zinc dialkyldithiophosphate) and enhanced film strength so critical to proper high performance engine protection. The Penn-Grade 1® oils “typical” 1,500 ppm Zinc (Zn) and 1340-1400 ppm Phosphorus (P) content provide the needed anti-wear protection to critical engine parts, such as piston/cylinder walls, roller cams under heavy valve spring pressure and especially those that employ a solid “flat tappet” type system. As important as the chemistry is to the Penn-Grade 1® oils, it is by no means the whole story. The unique base oil cut used to refine the Penn-Grade 1® High Performance Oils maintain a tremendous affinity to metal surfaces. This naturally occurring “metal wetting” characteristic enables the oil to stay put on your highly stressed engines and makes the Penn-Grade 1® High Performance Oil resist slinging for an extended period of time. Also, rest assured in knowing that the Penn-Grade 1® High Performance Oils are 100% Made in the USA.
Note: Penn Grade 1 High Performance Oils contain high zinc and phosphorous additive concentrations which can be detrimental to cars and trucks with catalytic converters.
Click On Documents Tab for MSDS and Technical Bulletin & Test Results
Write the First Review!
You must login to post a review.