HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times! Wrapping the header and exhaust system with our colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster! Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. Our colored exhaust wrap withstand 1200°F continuous and 2000°F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie™, hose clamps, or wire.
Rated for 1200°F continuous use, 2000°F intermittent.
Reduces under hood temperatures up to 50%
All rolls 1/16” thick
PLEASE NOTE: Your exhaust wrap will smoke after installation, it will eventually stop. Smoke is a normal by product of the curing process; your wrap will not burst into flames. HP Color Exhaust Wrap will discolor after installation and turn brown, this is a normal part of the color coating curing process. The brown color will disappear, intervals will vary with exhaust temperatures. Cooler burning exhaust systems can take up to 5 days of normal use before the color coat completely cures, hotter exhaust systems may take only 30 minutes.
Stainless Steel Thermal Ties
MSDS and instruction sheet can be found in document tab above