GMP-TH3507353-2 - Pace SBC 350CID Turnkey Engine with Edelbrock Carb & TH350 Transmission Package
• Pace engine prep and oil priming service. Click Here for more information.
• Edelbrock Aluminum, Black Powdercoated EPS Intake Manifold
• 500CFM Edelbrock Carb with Electric Choke
• Edelbrock High Flo 14” Air Cleaner
• Edelbrock Performance Fuel Pump with Plumbing to Carb
• MBI Small Cap Distributor, Coil, Plug Wires, Looms and Spark Plugs
• Stamped steel OE valve covers
• PCV Valve and Chrome Breather
• Drivers Side LH Oil Dipstick and Tube
• 14” Auto Trans Flexplate
• HD Starter and Bolts
• 6” Harmonic Balancer
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.
This turn-key GM 350CID engine comes fully assembled using a brand new (not remanufactured) GM 10067353 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate.
Power: 260 HP @4300 RPM, 350 ft. lbs. of torque @ 3600 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 8.5:1
Recommended Fuel: 87 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic Flat Tappet
Cam Lift: .383” Intake / .401” exhaust
Cam Duration @ .050”: 194 deg. Intake / 202 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron, 3/8” pressed in rocker studs
Combustion Chamber: 76cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Maximum GM Recommended RPM: 5100
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Cylinder Head Notes: 7 Bolt style Exhaust Flange Standard, 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers. This head is very similar to the old #882 castings from the 1970's.
Block Notes: Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.
TH350 transmission package designed for use with Chevrolet SBC 350CID 260HP universal crate engine.
Performance Automatic, in its never ending quest to stay on top of today’s need for modern day transmission packages, has come up with an addition to its popular Street Smart Packages. The PAGM Series Street Smart Systems are exclusively designed to complement selected Chevrolet Performance Crate Engines. The Chevrolet Performance Crate Engines have been increasingly popular with Street Rodders and Muscle Car enthusiasts alike. Performance Automatic has developed customized transmission packages and has made it easy to pick a combination for your vehicle. The PAGM Series Packages have been designed for both performance and street ability. These kits also include all the necessary transmission components to complete the installation.
The PAGM TH350 kit utilized the Street Smart Converter that is designed to give that “stop light to stop light” performance and to stretch that tank full of gas running down the highway. The PAGM series also provides you with a complete hardware kit consisting of all the nuts and bolts needed for your particular combination.
Performance Automatic PAGM series transmissions are specifically designed and tuned for use behind most of the Chevrolet Performance crate engines. The PAGM transmissions include the proper torque converter, beefed-up internal components, shift patterns and pressures to match the Chevrolet Performance crate engines cam profile, HP rating, torque curve and RPM range. Each transmission is dyno tested.
PAGM Transmission Package Includes :• Stage 1 TH350 transmission
Performance Automatic PAGM limited 2 year warranty. Click on Document tab above for full details.
Write the First Review!
You must login to post a review.