BBC 502HO 461HP EFI Engine Package with TKX 5 Speed Transmission Package Pace Performance GMP-TK6502HO-F

GMP-TK6502HO-F - Pace Fuel Injected CPP 502HO 450HP EFI Engine Package with TKX 600 5 Speed Transmission Package
Pace Fuel Injected CPP 502HO 450HP EFI Engine Package Includes:
• Pace engine prep and oil priming service. Click Here for more information.
• Fully GM assembled long block
• Black Cast Aluminum Valve Covers
• Aluminum Intake Manifold
• Black14” Air Cleaner
• Holley Sniper 650HP EFI system
• Oil pump, pick-up and oil pan
• HEI Distributor, Plug Wires, Looms and Spark Plugs
• 14” Auto Trans Flexplate
• HD Starter with Bolts
• 8” Harmonic Balancer
• Front timing cover
• Cast Iron Long Water Pump
• Oil Filter and Adapter
• Passenger Side RH Oil Dipstick and Tube
• 2 Oil Filters
• 7 Quarts of Zinc enhanced break in oil
• 7 Quarts of Zinc enhanced 5W30 non-synthetic oil
Warranty:
General Motors limited 2 year / 50,000 mile parts & labor warranty. Click Here to view or download warranty form.
Looking for Big Block power with great drivability, here it is. We took Chevrolet Performance's cast iron 502cid 450HP and installed the Holley Sniper EFI system along with all the other components needed to complete this engine. Say good bye to tuning and rebuilding carburetors and hot and/or cold drivability problems. The Holley EFI fuel injection system is self tuning according to your driving habits and insures you'll get the most out of your big block Chevy.

Specifications:
Power: 450 HP @ 5250 RPM, 550 ft. lbs. of torque @ 3500 RPM
Displacement: 502 CID
Bore x Stroke: 4.47” x 4.000”
Compression Ratio: 8.75:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: Forged Steel
Connecting Rods: Forged Steel
Pistons: Forged Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .510” Intake / .540” exhaust
Cam Duration @ .050”: 211 deg. Intake / 230 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron Rectangular Port
Combustion Chamber: 118cc
Valves: 2.190” Intake/ 1.880” Exhaust
Rocker Arms: Stamped Steel, 1.7:1 Ratio
Balance: External
Maximum GM Recommended RPM: 5500
Ignition Timing: Base 4 degrees BTDC, 26 degrees total

TREMEC's TKX series of 5-speed transmissions was first made famous by the 5-liter Mustang movement and has since been fitted into nearly every rear-wheel drive performance application imaginable.
Serving up 600 lb-ft of torque capacity, along with confidence-inspiring shifts and fuel-saving overdrive, the TKX offers an ideal blend of brute strength and street manners – which may be why it's the manual transmission behind more boulevard-bruising street machines and sportsman race victories than all of it's competitors combined.
2.87 1st, 1.89 2nd, 1.28 3rd, 1.00 4th,.82 5th, REV- 2.56
Pace TKX 600 Transmission Package Includes :
• TCET17722 Tremec TKX 600 5 Speed Transmission
• 14” Flywheel
• 11” Single Disc Clutch & Pressure Plate with Throw out Bearing
• Flywheel to Crank Bolts
• Transmission to Bellhousing Bolts
• Pilot bearing
• Aluminum Bellhousing
• Pressure Plate to Flywheel Bolt kit
• Clutch Fork Stud
• Speed Sensor Pigtail
• Neutral Safety Pigtail
• Ivory 5 Speed Gear Shift Knob
• 10” Chrome Shift Lever
• Shift Boot
• Slip Yoke
• 3-QT Synchromesh Transmission Fluid
Related Products:
Pace Professional Engine Dyno Break-In & Testing

GM Big Block Serpentine Accessory Drive System