Click on image to zoom

FTH-30064 - FiTech Fuel Injection Go EFI 2x4 1200HP/Power Adder - Matte Black Finish

Shipping: Free 48 state ground shipping
Pricing: $1,995.00
Free Shipping!


This Kit is for the guys who have 671 and 871 Roots Superchargers or make up to 1200 HP naturally aspirated on their Dual Quad setup. FiTech EFI Has made it simple with their Go EFI 2X4 POWER ADDER 1200HP self-tuning System. Works out of the box on your 2X4 Blower Plate as an inline setup or can be side mounted using custom linkages. ALSO, this kit is a bolt on for the most popular N/A dual quad and tunnel ram manifolds including the Edelbrock line of dual quad manifolds WITHOUT any adapters! They fit and look like they belong there because they were designed to fit from the start. One Throttle Body handles all of the brains while the second holds 4 additional injectors plus the IAC motor for idle stability. These can also be used in cross ram and tunnel ram configurations. **This kit does not include linkage or fuel lines**

Boost A/F targets are simple to adjust while timing curves can be retarded according to boost easily through your touch screen controller. This system makes tuning your Supercharged engine easy!

Bolt on 2 of these tough looking throttle bodies and drive your car as the system dials itself into the perfect calibration for all of your driving and weather conditions. If you decide you want to tune for more power or economy, the FiTech Touch Screen controller allows quick and easy On The Fly adjustments at your fingertips!

2-Boost Ready Throttle bodies in a Matte Black Finish Fits inline on 2x4 Blower Manifold (no linkage or fuel line included) Boost Ready ECU 2.5 Bar Internal MAP sensor good for 25 PSI! NITROUS control with a host of safety features and accessories for Nitrous tuning Nitrous and Boost specific target A/F target options Boost and Nitrous timing retard strategies 2 fan controls (can set at separate temperatures) Air-conditioning idle speed input kick up Advanced hand held Tuning Mode Enabled Pro Laptop Software , COMPLETE TUNING FOR PROFESSIONAL TUNERS 8 injectors capable of flowing 1200HP of fuel (1000 HP boosted) Initial setup is quick and easy Simple touch screen selections get you up and running in minutes Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune Basic install can be done with just 4 wires and 2 sensors to install Uses the latest Bosch 4.2 wide band o2 sensor while all other sensors are easily replaceable GM style parts The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a Huge amount of time and keeps things simple and neat. Throttle bodies have a completely universal base to fit any 4-bbl manifold All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing! Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Ignition timing can be controlled and adjusted on the fly from your touch screen controller Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb! Will work with CDI box but not required to control timing Built in Fuel pressure regulator. No extra regulator to mount on your firewall. Manufactured with OE engineering. Our ECUs are used Globally and pass Euro 5 emissions standards in new vehicles

Shipping Information

  • Item Requires Shipping
  • 24.0 lbs.
  • W15.0000” x H12.0000” x L15.0000”
  • Free Shipping!
  • Free 48 state ground shipping

Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours
Pace B2B