Pace Performance Chevy 350 300HP Engine with TBI EFI Includes:
• Pace engine prep and oil priming service. Click Here for more information.
• Aluminum Performance Intake
• FiTech 400HP EFI system. Click Here for more information about FiTech EFI systems
• Chrome 14” Air Cleaner
• HEI Distributor, Plug Wires, Looms and Plugs
• GM OE Black Steel Valve Covers
• 14” Auto Trans Flexplate
• HD Starter and Bolts
• 6” Harmonic Balancer
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.
Pace Performance EFI Fuel Pump PackagesPace Frame Mount In-Line EFI Pump Kit with Rear Mount Fuel Regulator/Filter Package
Pace Chevy 350 300HP Base Crate Engine
Pace Chevy 350 350HP Base Crate Engine
Pace Chevy 350 300HP EFI Engine with TH350 Trans Combo Package
Pace Chevy 350 300HP EFI Engine with Tremec TKO-600 5 Speed Trans Combo Package
Pace Fully Assembled "Brand New" 350CID 300HP
This turn-key GM 350CID engine comes fully assembled using a brand new (not remanufactured) GM 10067353 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate.
Power: 300 HP @5300 RPM, 356 ft. lbs. of torque @ 3700 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 8.5:1
Recommended Fuel: 87 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic Flat Tappet
Cam Lift: .443” Intake / .465” exhaust
Cam Duration @ .050”: 214 deg. Intake / 224 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron, 3/8” pressed in rocker studs
Combustion Chamber: 76cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Maximum GM Recommended RPM: 5100
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Cylinder Head Notes: 7 Bolt style Exhaust Flange Standard, 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers. This head is very similar to the old #882 castings from the 1970's.
Block Notes: Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.