GMP-TK67353-1F - Pace Fuel Injected SBC 350CID 260HP Turnkey EFI Engine with TKO600 5-Speed Transmission Package
• Pace engine prep and oil priming service. Click Here for more information.
• Aluminum Performance Intake
• FiTech 400HP EFI system. Click Here for more information about FiTech EFI systems
• Chrome 14” Air Cleaner
• HEI Distributor, Plug Wires, Looms and Plugs
• GM OE Black Steel Valve Covers
• 14” Auto Trans Flexplate
• HD Starter and Bolts
• 6” Harmonic Balancer
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.
Pace Performance EFI Fuel Pump PackagesPace Frame Mount In-Line EFI Pump Kit with Rear Mount Fuel Regulator/Filter Package
This turn-key GM 350CID engine comes fully assembled using a brand new (not remanufactured) GM 10067353 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate.
Power: 260 HP @4300 RPM, 350 ft. lbs. of torque @ 3600 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 8.5:1
Recommended Fuel: 87 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic Flat Tappet
Cam Lift: .383” Intake / .401” exhaust
Cam Duration @ .050”: 194 deg. Intake / 202 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron, 3/8” pressed in rocker studs
Combustion Chamber: 76cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Maximum GM Recommended RPM: 5100
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Cylinder Head Notes: 7 Bolt style Exhaust Flange Standard, 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers. This head is very similar to the old #882 castings from the 1970's.
Block Notes: Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.
TREMEC's TKO series of 5-speed transmissions was first made famous by the 5-liter Mustang movement and has since been fitted into nearly every rear-wheel drive performance application imaginable.
Serving up 600 lb-ft of torque capacity, along with confidence-inspiring shifts and fuel-saving overdrive, the TKO offers an ideal blend of brute strength and street manners – which may be why it's the manual transmission behind more boulevard-bruising street machines and sportsman race victories than all of it's competitors combined.
2.87 1st, 1.89 2nd, 1.28 3rd, 1.00 4th,.82 5th, REV- 2.56
Pace TKO 600 Transmission Package Includes :•TCET4618 Tremec TKO 600 5 Speed Transmission