GMP-700R4BP400-C - Pace SBC 400/460HP Classic Finish Crate Engine with 700R4 Transmission Combo Package.
BP4001CT1-CX Pace Prepped & Primed SBC 400/460HP Turn Key Classic Trim Crate Engine Includes: Warranty:
• Pace engine prep and oil priming service. Click Here for more information.
• Fully assembled long block
• Polished Finned Aluminum Valve Covers
• Chrome Triangular Air Cleaner
• As Cast Edelbrock RPM Air-Gap Intake Manifold
• Hand built AED 750CFM Holley mechanical secondary carb with electric choke
• Performance mechanical fuel pump, plumbed to carb with filter
• Red Cap HEI Distributor, Plug Wires, Looms and Spark Plugs
• Oil pump, pick-up and oil pan
• 14” Auto Trans Flexplate
• 8” Harmonic Balancer
• Front timing cover
• Performance Aluminum Long Water Pump (short style pump available upon request)
• Oil Filter Adapter
• Passenger Side RH Oil Dipstick and Tube
• Long Block Dyno Test Sheet
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
BluePrint limited 30 month / 50,000 mile parts & labor warranty. Click Here to view or download warranty form.
We start with BluePrint Engines dyno tested long block crate engines and finish them off with top quality, name brand components. These complete crate engines are delivered to your door ready to run.
Power: 460HP / 470 ft. lbs. of torque
Displacement: 400 CID
Bore x Stroke: 4.125” x 3.75”
Compression Ratio: 10.3:1
Recommended Fuel: 93 Octane
Block: Brand New, USA Manufactured & Machined Cast Iron, 1 piece rear seal, 4-bolt main caps with passenger side oil dip stick hole, brass freeze plugs.
Crankshaft: Brand New Cast
Connecting Rods: Cast 5.7” with 150,000 psi bolts
Pistons: Hypereutectic Aluminum pistons
Camshaft: Hydraulic Roller Tappet
Cam Lift: .544” Intake / .555” exhaust
Cam Duration @ .050”: 230 deg. Intake / 236 deg. Exhaust
Lobe Separation: 110 Degree
Cylinder Heads: Straight Plug Performance Aluminum, manufactured to accept both pre-85 and Vortec intake manifolds as well as center bolt and perimeter bolt pattern valve covers.
Combustion Chamber: 64cc
Valves: 2.02” Intake/ 1.60” Exhaust
Rocker Arms: Aluminum Roller, 1.5:1 Ratio
Valve Springs: Dual Max 575” Lift
Ignition Timing: Base 10 degrees BTDC, 34 degrees total
Performance Automatic 700R4 4 Speed with overdrive transmission package
Performance Automatic in its never ending quest to stay on top of today’s need for modern day transmission packages, has come up with an addition to its popular Street Smart Packages. The PAGM Series Street Smart Systems are exclusively designed to complement selected Pace crate engines. Performance Automatic has developed customized overdrive transmission packages and has made it easy to pick a combination for your vehicle. The PAGM Series Packages have been designed for both performance and street ability. These kits also include all the necessary transmission components to complete the installation.
The Street Smart Converters are designed to give that “stop light to stop light” performance and to stretch that tank full of gas running down the highway in lock up. The PAGM series also provides you with a complete hardware kit consisting of all the nuts and bolts needed for your particular combination.
Performance Automatic PAGM series transmissions are specifically designed and tuned for use behind most of the performance crate engines. The PAGM transmissions include the proper torque converter, beefed-up internal components, shift patterns and pressures to match this crate engine’s cam profile, HP rating, torque curve and RPM range. Each transmission is dyno tested.
PAGM Transmission Package Includes:• HD 700R4 transmission
Performance Automatic PAGM limited 2 year warranty.