Chevrolet Performance Serpentine Accessory Drive System, Without A/C
LS1, LS2, LS3, LS6 engines (LS1, LS2, & LS6 require 12635649 balancer)
Deluxe kit includes all of the components and hardware necessary to install on an engine without air conditioning.
Includes 150Amp Alternator, Power steering pump, mounting brackets, pullies, hardware, belt, tensioner etc. Kit uses OEM 2006-2007 Cadillac CTSV components.
This kit is was originally designed for CTS-V type engine bays and is taller and narrower than the 19155167 kit. Measurements from the crank center line: vertically 17.0" high, drivers side is 12.0" wide, and passenger side is 12.5" wide.
Note: Drive system will not bolt to Production Cast Iron Blocks
Installation Notes
If using a RUS648060 16mm X1.5mm O-ring adapter on the power steering pump in this kit, approximately .060" will need to be machined off of the back face of the pulley to clear the adapter fitting. The pump will supply 2 gallons per minute @ 1640/1740 PSI
Includes the following components:
Alternator
Alternator bracket
Belt tensioner
Belt
Power steering pump
Power steering brackets
Power steering resivoir
Mounting hardware
Use RUS648060 Russell fitting for power steering outlet.
does not include alternator connector pigtail, if needed order 15306009 seperately.If you are using a Chevrolet Performance harness and controller kit, the alternator pigtail is included and not needed.
Related Items:
Passenger side top mount add on A/C Package
Power Steering Pump to -6 AN Male Adapter Fitting
LS3 Harmonic Balancer for use with 19155166 Serp System
ARP HD Balancer bolt and washer kit
Total Reviews (0)
Write the First Review!