Hedman Hedders LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-7/8 X 2 IN. DIA, STEPPED LONG TUBE 45100

Hedman Hedders, along with its Hedman Husler race header division, have been building quality headers in the USA since 1954! Hedman has manufactured long and mid-length tube headers for Camaros, Firebirds and Novas for decades, so designing a good fitting, great performing set of headers for popular LS engine swaps is nothing new.

These STEPPED long tube LS swap headers fit 1967-1969 GM F-Body (Camaro, Firebird) and 1968-1974 GM X-Body cars (Chevy Nova, Pontac Ventura, Buick Apollo). They have a mild steel construction, and use smooth flowing, 1-7/8 in. x 2 in. diameter STEPPED TUBES that provide higher torque across the entire RPM range. The smaller tube diameter at the exhaust port increases back-pressure at low-RPM to improve low-end torque from the line, or out of the corner, while the larger diamter tube segment produces more torque as you reach Wide-Open throttle.

The stout 3/8" header flanges ensure a great seal that will resist warping, and the high-flow 3 in. race collectors ensure unimpeded exhaust flow for maximum performance.

Hedman Husler confidently backs these headers with a One year warranty. This part number ships from the factory with a raw mild steel surface.

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body) | 1-7/8 in. x 2 in. Diameter, Stepped Long Tube | 3 in. Weld-on Collector- Uncoated, Mild Steel Construction

Made in the USA!

This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.