Pro Series by Blueprint Engines™
BluePrint Pro Series Engines are a great choice for drivable and reliable high performance engines. All rotating assemblies are balanced within 2 grams on a computerized balancer. Blueprint Pro Series Engines are dyno tested and include dyno sheets. Best of all—they feature a 30-month/50,000-mile warranty. For high horsepower, and big displacement engines, BluePrint ProSeries is the way to go!
Power: 575 HP, 560 ft. lbs. of torque
Displacement: 454 CID
Bore x Stroke: 4.250” x 4.00”
Compression Ratio: 10:1
Recommended Fuel: 91 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps with drivers side oil dip stick hole, brass freeze plugs.
Crankshaft: Forged Steel, polished, stress relieved and shot peened with chamfered oil oils
Connecting Rods: Heavy Beam with 150,000 psi bolts
Camshaft: Hydraulic Roller Tappet
Cam Lift: .609” Intake / .576” exhaust
Cam Duration @ .050”: 244 deg. Intake / 252 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Performance Aluminum
Combustion Chamber: 64cc
Valves: 2.02” Intake/ 1.60” Exhaust
Rocker Arms: Aluminum Roller, 1.6:1 Ratio
Valve Springs: N/A
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
• Fully assembled long block
• Fabricated Aluminum Valve Covers
• Melling High Volume Oil pump, pick-up and oil pan
• Front timing cover with 8” timing pointer
• Harmonic Balancer
• Oil Filter Adapter
• Dyno Test Sheet
BluePrint limited 30 month / 50,000 mile parts & labor warranty. Click on Document tab above for full details.
Write the First Review!
You must login to post a review.