ED-46220 - Edelbrock SBC 350 440HP Pro-Flo 2 EFI Vortec Satin Trim with Long W/P
This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.
Performer RPM E-Tec Pro-Flo2 9.5:1 - (440 HP & 425 TQ)
This fuel injected small-block has the same specifications of the RPM E-TEC 435 but instead of a carburetor, includes Edelbrock's powerful and efficient Pro-Flo 2 electronic fuel injection. Assembly begins with a GM supplied ZZ short block featuring forged steel crankshaft, powdered metal connecting rods and pistons. Edelbrock technicians meticulously install a host of Edelbrock Total Power Package® components including E-TEC 170 cylinder heads, RPM roller camshaft and roller rocker arms. The Pro-Flo2 EFI system is complete with intake manifold, fuel injectors, fuel rails and throttle body. The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from the driver's seat with the included handheld calibration module. A Mallory® distributor, wiring harness, fuel pump, fuel filter, fuel hose, attaching hardware and software are also included. The Pro-Flo 2 offers all the modern performance of fuel injection with the classic style of a four-blade throttle body that accepts a round top-mounted air-cleaner.
Power: 440 HP, 425 ft. lbs. of torque, click on Documents Tab for Dyno Sheet
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 9.5:1
Recommended Fuel: 89 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps.
Crankshaft: Forged Steel
Connecting Rods: Powdered Metal Steel
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .539” Intake / .548” exhaust
Cam Duration @ .050”: 234 deg. Intake / 238 deg. Exhaust
Lobe Separation: 114 Degree
Cylinder Heads: Aluminum, 3/8” screw-in rocker studs.
Combustion Chamber: 64cc
Valves: 1.94” Intake/ 1.55” Exhaust
Rocker Arms: Aluminum Roller, 1.5:1 Ratio
Valve Springs: ED5821
Maximum GM Recommended RPM: 5800
Finish: Edelbrock Components are As-Cast Satin Finish
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
• Fully GM assembled long block
• Oil pump, pick-up and oil pan
• Edelbrock RPM Pro-Flo 2 EFI System
• MSD Pro Billet Distributor
• Cast Aluminum valve covers with Edelbrock logo
• 8” Harmonic Balancer
• Front timing cover
• Long-Style Water Pump Included
• Oil Filter and Adapter
• Passenger Side RH Oil Dipstick and Tube
2 year / Unlimited mileage parts & labor warranty.
Optional Finishes and Water Pump Choices
Satin Finish without Water Pump
Polished Finish without Water Pump
Satin Finish with Short Water Pump
Polished Finish with Short Water Pump
Satin Finish with Long Water Pump
Polished Finish with Long Water Pump
Optional Edelbrock Engine Break-In and Dyno Service
From Edelbrock intake manifolds to carburetors to EFI systems, Edelbrock parts run the gamut of high performance components. But with Edelbrock, you don't have to worry about their specializing in many areas, because they take performance just as seriously as you do. That means all their products are not just tuned and tested for performance, but for Edelbrock performance. With a racing heritage of almost 90 years, you can be sure Edelbrock won't be cutting corners when it comes to innovation and build quality. After all, they' have a reputation to protect.
- Item Requires Shipping
- 500.0 lbs.
- Free Shipping!
- FREE 48 State Truck Freight Shipping (International shipping will require freight quote)
Total Reviews (0)
Write the First Review!
You must login to post a review.
- We don’t just want your business today. We want to EARN your business for LIFE!
- USA Owned, Operated & Employed
- Installers & Resellers Click Here to Apply
We Specialize In:
- GM LS Conversions
- Engine & Trans Combo Kits
- Unique Ready to Run Engines
- Have a question?
- to Email our Sales & Tech Staff
- 888-748-4655 Mon-Fri 8AM-6PM EST
- Click above for 24/7 Live Chat Service.