GMP-10067353-6 Brand New SBC 350 with Edelbrock 94 Tri Power

This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.

Availability: Item has been discontinued and is no longer available
Shipping: FREE 48 State Shipping


Pace Fully Assembled "Brand New" SBC 350CID with Edelbrock 94 Carb Tri-Power

This Pace exclusive SBC 350 engine comes fully assembled using a brand new (not remanufactured) GM 10067353 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate. These engines are individually run for approximately 30 minutes or more on the dyno with various loads applied to insure proper engine break-in. The engine is then allowed to cool for final inspection. Carburetors then receive a tune and linkage is adjusted prior to performance pulls on the dyno. Dyno result sheets are included with engine.

Power: 277 HP @4700 RPM, 336 ft. lbs. of torque @ 4000 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 8.5:1
Recommended Fuel: 87 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps.
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic Flat Tappet
Cam Lift: .383” Intake / .401” exhaust
Cam Duration @ .050”: 194 deg. Intake / 202 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron, 3/8” pressed in rocker studs.
Combustion Chamber: 76cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Valve Springs:3911068
Balance: Internal
Maximum GM Recommended RPM: 5100
Ignition Timing: Base 10 degrees BTDC, 32 degrees total

Cylinder Head Notes: 7 Bolt style Exhaust Flange Standard, 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers. This head is very similar to the old #882 castings from the 1970's.

Block Notes:Block is drilled for drivers and/or passenger side oil dipsticks, plugs are included to plug unused dipstick tube hole. Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.

Package Includes:

• Fully GM assembled long block
• Polished Finned Aluminum Valve Covers
• Polished Finned Breathers
• Oil pump, pick-up and oil pan
• Front timing cover
• Edelbrock 2015 Tri-Power Package
• Performance Fuel Pump with Plumbing to Carb
• Distributor, Plug Wires, Looms and Spark Plugs
• 6” Harmonic Balancer
• Oil Filter and Adapter
• Drivers Side LH Oil Dipstick and Tube

• Engine Dyno Tune and Break-in with Dyno Spec Sheet

General Motors limited 1 year Parts Replacement Warranty. Warranty does NOT include labor.

Related Engines:
GM ZZ4 350CID Engine with Holley Tri-Power
Chevy Performance 290HP 350CID Engine
300HP 350CID Long Block Crate Engine


  • GMP-10067353-6
  • GMP-10067353-6
  • PACE Performance
  • Item has been discontinued and is no longer available
  • New


Shipping Information

  • Item Requires Shipping
  • 500.0 lbs.
  • FREE 48 State Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.

Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours
Pace B2B