Due to heightened concern over the COVID-19 virus, Pace Performance has taken a proactive approach to slow the spread of this virus. We are operating on a skeleton crew in the warehouse but have started shipping orders again. Orders will be processed as soon as possible. Thank you for your understanding.
Pace Performance Chevy 350 260HP Engine Includes:
• Aluminum Performance Intake
• Edelbrock AVS Carb
• Fuel Pump and Fuel Line to Carb
• Chrome 14” Air Cleaner
• HEI Distributor, Plug Wires, Looms and Plugs
• GM OE Black Steel Valve Covers
• 14” Auto Trans Flexplate
• HD Starter and Bolts
• 6” Harmonic Balancer
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.
Pace Fully Assembled "Brand New" 350CID 260HP
This turn-key GM 350CID engine comes fully assembled using a brand new (not remanufactured) GM 10067353 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate.
Power: 260 HP @4300 RPM, 350 ft. lbs. of torque @ 3600 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 8.5:1
Recommended Fuel: 87 Octane
Block: Cast Iron, 2 piece rear seal, 4-bolt main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic Flat Tappet
Cam Lift: .383” Intake / .401” exhaust
Cam Duration @ .050”: 194 deg. Intake / 202 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Cast Iron, 3/8” pressed in rocker studs
Combustion Chamber: 76cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Maximum GM Recommended RPM: 5100
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Cylinder Head Notes: 7 Bolt style Exhaust Flange Standard, 85' and prior intake manifold bolt pattern. Perimeter bolt style Valve Covers. This head is very similar to the old #882 castings from the 1970's.
Block Notes: Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.