HP & Torque: 373HP / 400 FT LBS
Compression Ratio: 9.3:1
Cast Iron Heads
Hydraulic Roller Cam
Cast Steel Crank
Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick Drilled and tapped for clutch linkage
Cast steel crankshaft
OEM type 5.700" connecting rods
Internal Front/ External Rear
Vortec cast iron heads
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
Cam Type: Roller
@ .050, 110 degrees LSA
Using 1.5 rockers
34 Degrees Total at 3500 RPM
Carburetor 600 cfm
Long Water Pump, standard rotation
Thermostat and housing
Intake manifold, satin aluminum
Dyno test results shipped with engine
30 month / 50,000 mile
Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR
Not for use in pollution controlled vehicles.
Has no cam sensor provisions.
This engine requires a late 350ci weighted flexplate/flywheel.
If you are using an automatic transmission, BluePrint Engines recommends a 1800-2200 rpm stall converter.
This engine is NOT compatible with factory fuel injection. See BP38303CT for 1996-2000 upgraded Vortec truck engine.