Click on image to zoom

19257634 - CPP Automatic Transmission Controller Kit - Pre Programmed For 4L60E, 4L65E, 4L70E Transmission And CPP E-67 Controller (LS3, LS7 Etc)

This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.

Availability: Replaced by 19302405


The GM Performance Parts Automatic Transmission Controller is a fully programmable transmission control system. Through a friendly PC Windows interface users are able to program transmission settings based on speed, engine load, engine speed and other parameters.

Product Specifications
Many special operating modes available including, manual mode for upshift/downshift button capability (paddle shifting and button shifting)
Compact Dimensions (5.9in x 4.15in x 1.75in)
Durable 63-pin weather sealed circular plastic connector built into case
All components specified for automotive conditions (125 degrees C with fuel, grease, and oil resistance).
9 PWM Driver outputs (Selectable 12v or ground output) (3amp)
3 Digital Driver outputs (Selectable 12v or ground output) (3amp)
4 frequency inputs (Engine Speed, TC Speed, Driveshaft speed, additional speed)
RS 232, CAN (2.0b) communications
16 Digital Inputs
6 Analog Inputs
1 frequency output (speedometer control)
Easy to use windows software interface
Data logging capability

Supported Transmissions

GM 4L60E
GM 4L65E
GM 4L70E
GM 4L80E
GM 4L85E

The transmission controller is designed to control a transmission. The transmission controller is not designed to function in a factory environment. It does not communicate with factory body control modules, engine control modules, modern dashboards, or vehicle communication networks. If you remove your factory transmission controller, your check engine light will turn on. Many factory functions, such as cruise control, may not work. The engine may run in a limp mode. The TCU is a stand-alone transmission controller. It can not tell (and doesn't care) whether the transmission is connected to a fuel-injected engine, a carbureted engine, or even an electric motor. If components on your vehicle are expecting to see a transmission and a transmission controller then you must first overcome those issues before purchasing a controller. A simple test is to unplug the transmission and factory transmission controller connectors and observe if there are any problems. If you would like to install the transmission controller in a factory environment, we strongly recommend you work with a dealer who has experience with installing the PCS transmission controller in that vehicle. PCS does not provide support for vehicle-specific issues that may arise when using the transmission controller.

Minimum Computer Requirements
Processor: Pentium 200MHz or above RAM: 24MB
OS: Windows 98, ME, NT, 2000, XP (32 and 64-bit), Vista (32 and 64-bit)
Hard Drive Space: 20MB for install, additional space for data logs & calibrations
Video: 800x600 or greater resolution
Peripherals: CD-ROM or internet connection required to obtain software
Comm Port: The TCU communicates using a 9-pin RS-232 serial communication port. Please note that most new laptops do not have this port. If your laptop does not have this port, you will need to purchase a USB to Serial Port Adapter. PCS sells an adapter (part num WRE-2200) but you can purchase one from a local electronics store. If you use a USB to serial adapter, you absolutely MUST run the CD that came with the adapter before you plug it into the computer. Failure to run the USB to serial adaptor CD before plugging in the adapter will prevent communication to the TCU.

Click here to download instruction manual

Application List




Shipping Information

  • Item Requires Shipping
  • 9.0 lbs.
  • W10.0000” x H6.0000” x L14.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.

Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours
Pace B2B