Designed to feed serious EFI and Carbureted engines, gasoline, ethanol or methanol. The 12 Series Belt Drive Pump must be driven by a pulley and cog drive belt allowing the pump to be driven from your crankshaft. It can be used in high or low pressure applications.
Flows up to 12 GPM
5,000+ HP on gas, up to 2500 HP methanol.
High efficiency, Gerotor pumping mechanism.
Tough, Type III hard coat anodized body.
CNC Machined from 6061 T6 aircraft aluminum.
Includes both 1.25? barb and AN-16 Male inlet.
ORB-12 female outlet port.
EFI applications require high-flow bypass regulators:
P/N 13132, 13133, 13137 or 13113.
Mounting Bracket: P/N 11706
Cog Pulley: P/N 21109.
Electric Priming/Starting Kit: P/N 17301
Installation and plumbing instructions can be found in document tab above