Orders may take longer than usual to process due to manufacturers having issues receiving and shipping parts. If you need to know if a part is in stock, please call prior to placing your order. We are doing everything within our control to ship orders as soon as possible.
When you install a crank trigger system, having locked out timing may put a strain on the starter and flywheel. This compact controller provides a retard that automatically retards the timing during cranking to ease the pressure. The MSD Starter Saver measures only 1.5" X 3.5" X 2" and wires into your ignition system with only four wires. It can be programmed to retard the tim­ing 10 degrees or 20 degrees during cranking only. The retard is activated when the engine begins cranking and is deactivated once the engine reaches over 800 rpm. (If the engine rpm drops below 500 rpm it will activate again.)
Features:
Compact unit provides 10 degrees or 20 degrees of start retard to ease pressure on the starter and flywheel during cranking
Plugs into an MSD Distributor or Crank Trigger pickup
Built-in LED monitors trigger input signals
Built-in signal stabilizer produces steady timing at all rpm
Must be used with an MSD Ignition Control, magnetic pickup trigger and only on V-8 applications
Start Retard to make for Easier Starts on Crank Triggered Engines
Write the First Review!