Holley FILTER/REGULATOR ASY - 8 AN, 175 GPH, 10 12-876

When converting your fuel system to a return style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley continues to be the leader in fuel system development to make your life easier! The new Holley EFI Filter Regulator assembly simplifies your installation by combining the fuel filter and regulator in one assembly that can be mounted in the rear of the vehicle. Thus making your return line much shorter. The aluminum assembly contains a 175 GPH 10 Micron filter and a regulator preset at 59.5 psi. The filter regulator comes in 3/8 in. NPT or -8AN o-ring port sizes to match most EFI fuel systems. Add billet mounting clamps; 162-574 and 162-574S

Features:

• Minimize The Fuel Line Plumbing When Installing An EFI Conversion
• Contains 175 GPH 10 Micron Filter
• Regulator is Pre-Set At 59.5 PSI

Holley EFI Filter Regulator | Combines Fuel Filter/Regulator Into 1 Assembly | 175 GPH | 10 Micron Filter | -8AN Ports | Internal Regulator Preset At 59.5 PSI

Made in the USA!