LS3 Crate Engine by Pace Performance 525 HP GMP-19256529

For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.
"This is a terrific engine combination that illustrates perfectly the performance potential of the LS engine family - and how it can be enhanced dramatically at an affordable price," said Jim Campbell, GM U.S. vice president of Performance Vehicles and Motorsports. "Whether you've got a new Camaro or a classic Chevelle, this engine delivers terrific bang for the buck."
Using the LS3 production engine - the same used in Corvettes and Camaros - as the foundation for the LS376/525 helped keep the retail price lower, while the ASA camshaft is a proven, power-building component that has been successful in the high-rpm world of circle track racing.
The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high rpm.
The cam also gives the LS376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS376/480 (part number 19244549) and the carbureted LS376/515 (part number 19419868).
"The LS376/525 engine has an edge to it," said Campbell. "You'll notice it in the idle quality and you'll feel it when the revs quickly climb."
As delivered, the LS376/525 includes the intake manifold, with the injectors, fuel rail and throttle body already installed, along with the water pump and ignition system. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications and some installations for older vehicles will require the oil pan changed.
Specifications:
Power: 525 HP @ 6300 RPM, 489 ft. lbs. of torque @ 4400 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.060” x 3.620”
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .525” Intake / .525” exhaust
Cam Duration @ .050”: 226 deg. Intake / 236 deg. Exhaust
Lobe Separation: 110 Degree
Cylinder Heads: Aluminum L92 style ports
Combustion Chamber: 68cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600
GM Recommended Torque Converter Stall 3000-3400
Engine Includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Oil pump, pick-up and 1998-2002 Camaro oil pan
• EFI Intake with fuel rails, injectors and throttle body
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Oil Filter
• Passenger Side RH Oil Dipstick and Tube

Warranty:
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.