GMPP Serpentine Accessory Drive System, With A/C
- Fits LS1, LS2, LS3 & LS6 engines (LS1, LS2, & LS6 require 12635649 balancer)
- Deluxe kit includes all of the components and hardware necessary to install on an engine with air conditioning.
- Includes 150Amp Alternator, Power steering pump, V7 variable displacement A/C compressor, mounting brackets, pullies, hardware, belts, tensioners etc. Kit uses OEM 2005-2007 Corvette components.
- A/C compressor has its own mounting and belt, so if your car is non a/c simply do not mount the compressor
- Electrical connector for alternator #15306009 is not included. Electrical connector for A/C compressor clutch #12101937 is not included .
- This kit is was originally designed for Corvette type engine bays and is shorter and wider than the 19155066 kit. Measurements from the crank center line: vertically 15.5" high, drivers side is 17.5" wide, and passenger side is 13" wide.
Use RUS648060 Russell fitting for power steering outlet.
You may also use the Danchuk power steering banjo fitting 12571
The power steering pump will supply 2.4 / 2.8 gallons per minute @ 1250/1350 PSI
The A/C compressor used in this kit is a GM/Delco V7 For adapter fittings, see www.docsblocks.com their part numbers for adapters are AA0443 or AA0442
Serpentine System without Air
Passenger side top mount add on A/C Package
Alternator connector and pigtail
A/C Compressor connector and pigtail
Power Steering Pump to -6 AN Male Adapter Fitting
LS3 Harmonic Balancer for use with 19155067 Serp System
ARP HD Balancer bolt and washer kit