CPP Serpentine Accessory Drive System, Without A/C
Note: Drive system will not bolt to Production Cast Iron Blocks
If using a RUS648060 16mm X1.5mm O-ring adapter on the power steering pump in this kit, approximately .060" will need to be machined off of the back face of the pulley to clear the adapter fitting. The pump will supply 2 gallons per minute @ 1640/1740 PSI
Includes the following components:
Use RUS648060 Russell fitting for power steering outlet.
does not include alternator connector pigtail, if needed order 15306009 seperately.If you are using a CPP harness and controller kit, the alternator pigtail is included and not needed.
Passenger side top mount add on A/C Package
Power Steering Pump to -6 AN Male Adapter Fitting
LS3 Harmonic Balancer for use with 19155166 Serp System
ARP HD Balancer bolt and washer kit