BP350CTFK BluePrint Engines 350CI 341HP Cruiser Crate Engine, Fuel Injected Drop In Ready with Front Drive

HP & Torque: 341 HP / 371 FT LBS
Compression Ratio: 9.0:1
Aluminum Heads
Hydraulic Roller Cam
Steel Crankshaft
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

Steel Crankshaft
3.480" Stroke
Forged 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear engine balance

Cylinder Heads:

BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners

Cam Specs:

Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 - 115 degree lobe separation

Ignition Timing:

32 Degrees Total at 3500 RPM

Also Includes:

Valve covers
Oil pan
Spark plugs and Wires
Timing cover
Aluminum intake
Waterneck and Thermostat
HEI distributor
EFI system
Dyno test results shipped with engine
Black Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)

Warranty:

30 month / 50,000 mile

Notes:

This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel