Additional Images

Chevrolet Performance SP383 EFI 450HP Turn Key Crate Engine with T56 6 Speed CPSSP383EFITKT56

This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.

CPSSP383EFITKT56
Shipping: FREE 48 State Shipping
Pricing: $21,436.80

Customize Your Item

- Additional Shipping Options -
 * required
Qty:
Free Shipping!

Description

New Connect and Cruise Package

Chevrolet Performance’s SP383 EFI Turn Key-kit offers the strong pull of the proven 383 “stroker” combination and the contemporary convenience of electronic fuel injection, delivered with most of the engine accessories required to get the engine running in your project vehicle! The SP383 EFI incorporates a port-style injection system, with the injectors plumbed in a carburetor-style intake manifold, and the throttle body mounted in the conventional position of the carburetor, which allows for a traditional air cleaner and a classic appearance. It’s rated at 450 horsepower and a stout 436 lb.-ft. of torque.
Our comprehensive Turn-Key assembly is delivered with the distributor and damper installed. The throttle body, starter, fuel pump, air conditioning pump, alternator, single-belt front-end accessory drive system and more are also included in the kit.

Engine and Trans Includes:

•SP383 EFI Turn Key Crate Engine
•GM T56 Transmission with shift lever & knob
•GM Bellhousing, flywheel & clutch installation package

It’s hard to beat the classic 383 “stroker” for Small-Block torque, but Chevrolet Performance engineers found away. They matched it with the driving convenience of electronic fuel injection!
Rated at 450 horsepower and 436 lb.-ft. of torque, the SP383 EFI also features a high-performance roller camshaft and lightweight aluminum, Fast Burn-style cylinder heads with modern valvetrain technology that includes beehive-type valve springs and aluminum roller rocker arms. The SP383 EFI incorporates a port-style injection system, with the injectors plumbed in a carburetor-style intake manifold, and the throttle body mounted in the conventional position of the carburetor, which allows for a traditional air cleaner and a classic appearance. It’s a vintage look that offers contemporary drivability and strong performance.
Our SP383 EFI Deluxe kit includes the distributor, damper and flexplate, ready to install.

Specifications:
Power: 450 HP @ 5800 RPM, 436 ft. lbs. of torque @ 4800 RPM
Displacement: 383 CID
Bore x Stroke: 4.00” x 3.80”
Compression Ratio: 9.6:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: 4340 Forged Steel
Connecting Rods: HD Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .509” Intake / .528” exhaust
Cam Duration @ .050”: 222 deg. Intake / 230 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: GM Fast Burn Aluminum Dual Bolt Pattern, 3/8” screw-in rocker studs
Combustion Chamber: 62cc
Valves: .200” Intake/ 1.55” Exhaust
Rocker Arms: Aluminum Roller, 1.5:1 Ratio
Valve Springs: 12625033
Balance: External
Maximum GM Recommended RPM: 6000
Ignition Timing: Base 10 degrees BTDC, 36 degrees total

Engine Includes:
• Fully GM assembled long block
• Black Aluminum Valve covers
• GM/Edelbrock Vortec Intake Manifold
• Oil pump, pick-up and oil pan
• 12-3/4” Auto Trans Flexplate
• 8” Harmonic Balancer
• Front timing cover
• Oil Filter and Adapter
• Passenger Side RH Oil Dipstick and Tube

Note: Water pump and plug wires are not included

Warranty:
General Motors limited 2 year / 50,000 mile parts & labor warranty. Click on Document tab above for full details.

The smoothest shifting, strongest, and most versatile 6-speed aftermarket transmission.


These Chevrolet Performance Tremec T-56 manual transmissions are truly brand new from the ground up. They can withstand up to 700 ft.-lbs. of torque, with gears featuring substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment.

Features:

Exterior case similer to forth-generation F-body with stronger, high-capacity gear sets, input shaft and output shaft used in the Tremec TR6060

26-spline input shaft
31-spline output shaft
Slip-yoke design
40-tooth reluctor ring that's necessary for use with electronic vehicle speed sensors used with Chevrolet Performance controllers
Kit includes shifter handle and Chevrolet Performance-logo ball-type shift knob
New synchronizers featuring fine tooth angles
Bolstered one-piece countershaft to resist distortion
Re-designed shift forks
An extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities
Street - (1st-2.66, 2nd-1.78, 3rd-1.30, 4th-1.00, 5th-0.80, 6th-0.63)

Application List

Universal

Details

Shipping Information

  • Item Requires Shipping
  • 448.0 lbs.
  • W44.0000” x H39.5000” x L36.0000”
  • Free Shipping!
  • This item will require a special quote for shipping charges.
  • FREE 48 State Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.


Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours