Chevy 350 Crate Engine by Pace Performance 385HP Polished Finish with 700R4 Transmission Package GMP-700R4SP350-3T

GMP-700R4SP350-3T - Pace CPP SP350 385HP Polished Finish Engine with 700R4 Transmission Package.

Pace Performance CPP SP350 385HP Turnkey Engine with Polished Finish Includes:
• Pace engine prep and oil priming service.
• Fully GM assembled long block
• Polished Aluminum Valve Covers with Chevy Logo
• Steel Chrome 14” Air Cleaner with Chevy Logo
• Oil pump, pick-up and oil pan
• Aluminum Performance Intake
• Hand built AED 750CFM Holley mechanical secondary carb
• Performance Fuel Pump with Plumbing to Carb
• HEI Distributor, Plug Wires, Looms and Spark Plugs
• 14” Auto Trans Flexplate
• HD Starter with Bolts
• 8” Harmonic Balancer
• Front timing cover
• Performance Aluminum Long Water Pump (short style pump available upon request)
• Oil Filter Adapter
• Passenger Side RH Oil Dipstick and Tube
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan

Warranty:
General Motors limited 2 year / 50,000 mile parts & labor warranty.

The new SP350 uses the proven ZZ4 short block and adds to it the Fast Burn aluminum cylinder heads for 385 value packed horsepower. With value in mind, the SP350 uses stamped steel rocker arms and the same ZZ4 camshaft that powers thousands of hot rods. The SP350 is an excellent choice for the basis of a custom engine. Its strong forged steel crankshaft and forged powdered metal connecting rods have been proven to 500 horsepower.
Specifications:
Power: 385 HP @ 5600 RPM, 405 ft. lbs. of torque @ 3600 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 9.6:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: Forged Steel
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .474” Intake / .510” exhaust
Cam Duration @ .050”: 208 deg. Intake / 221 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Dual Bolt Pattern Fast Burn Aluminum, 3/8” screw-in rocker studs
Combustion Chamber: 62cc
Valves: .200” Intake/ 1.55” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Valve Springs: LS Beehive Springs, Max .530” Lift
Balance: Internal
Maximum GM Recommended RPM: 5800
Ignition Timing: Base 10 degrees BTDC, 36 degrees total @ 4000 RPM

TCI Street Fighter 700R4 4 Speed with overdrive transmission package
Street Fighter Transmission Package Includes:
• HD 700R4 transmission
• 2400-2600 Stall Torque Converter
• Transmission Dipstick and Tube
• Kick-Down Cable
• 12 Quarts Automatic Transmission Fluid
• Universal transmission cooler

Warranty:
TCI Automotive limited 90 day warranty.