Includes Pace engine prep & oil priming service and installed Holley 302-1 Muscle Car Swap Oil Pan
This unique engine starts with the Chevrolet Performance LS525HP crate engine and gets the Chevrolet Performance 88958679 front distributor drive timing cover kit installed along with the other needed components to complete this turnkey crate engine. No engine control module (ECU) or wiring harness is needed. Standard Chevy location radiator hose inlet and outlet. Front timing cover designed with heater hose ports. Our dyno test results: 550HP @ 6700 RPM, 496 ft.-lbs. of torque @ 5000 RPM.
Pace Performance Upgrades Include:
• Pace engine prep and oil priming service. Click Here for more information.
• Pace installed Holley 302-1 oil pan (click here for details), other oil pans available
• Chevrolet Performance LSX Single Plane Intake Manifold
• Hand built AED 750CFM Holley mechanical secondary carb with electric choke
• 14” Chrome Air Cleaner
• 14” Auto Trans Flexplate
• 6.325” ATI Harmonic Balancer
• Installed Chevrolet Performance 88958679 front distributor drive timing cover kit
• Thermostat and Housing
• HEI Distributor, Plug Wires, Looms and Spark Plugs
• Stewart Performance Aluminum Water Pump
• Proform GM Licensed Chrome Aluminum Valve Covers with Chevrolet script
• HD Starter & Bolts
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
The Chevrolet Performance 88958679 front distributor drive timing cover accepts a Ford style mechanical fuel pump, mechanical fuel pump is not included but we can install and plumb upon request
Using the LS3 production engine - the same used in Corvettes and Camaros - as the foundation for the LS376/525 helped keep the retail price lower, while the ASA camshaft is a proven, power-building component that has been successful in the high-rpm world of circle track racing.
The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high rpm.
Specifications:
Power: 525 HP @ 6200 RPM, 486 ft. lbs. of torque @ 5200 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.065” x 3.622”
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .525” Intake / .525” exhaust
Cam Duration @ .050”: 226 deg. Intake / 236 deg. Exhaust
Lobe Separation: 110 Degree
Cylinder Heads: Aluminum L92 style ports
Combustion Chamber: 68cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600
Engine includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Intake, Injectors and Throttle Body
• 14” Auto Trans Flexplate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Passenger Side RH Oil Dipstick and Tube
Warranty:
General Motors limited 1 year / 50,000 mile parts only warranty. Click on Document tab above for full details.
Total Reviews (0)
Write the First Review!