Pace Performance Chevy 350 390HP Engine with TBI EFI Includes:
• Aluminum Performance Intake
• Edelbrock Pro-Flo4 EFI system
• Chrome 14” Air Cleaner
• HEI Distributor, Plug Wires, Looms and Plugs
• Chrome Aluminum Slant Edge Valve Covers (not shown)
• Polished water pump
• 12.75” Auto Trans Flexplate
• HD Starter and Bolts
• 8” Harmonic Balancer
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
Includes Oil Filter adapter, dipstick, and tube
General Motors limited 1 year parts only warranty. Click Here to view or download warranty form.
Pace Fully Assembled "Brand New" 350CID 390HP
This turn-key GM 350CID engine comes fully assembled using a brand new (not remanufactured) GM 350cid 4 bolt main long block. We have preinstalled all name brand components needed to make this engine ready to run, right out of the crate.
Power: 390 HP @5800 RPM, 420 ft. lbs. of torque @ 4000 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 9.4:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: Forged Steel
Connecting Rods: Powdered Metal Steel
Camshaft: Hydraulic Roller
Cam Lift: .473” Intake / .473” exhaust
Cam Duration @ .050”: 215 deg. Intake / 223 deg. Exhaust
Lobe Separation: 108 Degree
Cylinder Heads: Vortec Cast Iron, 3/8” pressed in rocker studs
Combustion Chamber: 64cc
Valves: 1.940” Intake/ 1.500” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Valve Springs: 10212811
Maximum GM Recommended RPM: 5800
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Block Notes: Clutch Z-Bar hole is drilled and tapped for manual trans applications. Engine mount holes drilled and tapped for both early-style front motor mount brackets and the normal side motor mounts.
You must login to post a review.
Write the First Review!