GMP-LSX454T56 - Chevy Performance LSX454 with 6 Speed M/T Combo

New Connect and Cruise Package

This New Pace Performance Connect-and-Cruise package combines late model engine technology with old school gear banging fun.

Pace Exclusive LSX 454 585HP with LS7 EFI Crate Engine

An engine with 454 cubic inches will always be associated with higher performance Chevys, and that tradition continues with the all new LSX454 crate engine. We started with the new LSX bowtie block, stuffed it with an all-forged, super tough rotating assembly, and bolted on a pair of new GM deep breathing LSX six-bolt cylinder heads.

The new LSX six bolt cylinder heads are based on the race-derived LS7 heads that help deliver more than 500 horsepower in the Corvette Z06. They enable tremendous low end torque and great high RPM power. The Pace LSX 454 is delivered fully assembled with engine controller and harness. It also comes dressed with great looking, all new orange powder-coated valve covers with "LSX 454" logos engraved and painted in black.

Keeping with the LS tradition, this LSX454 requires no more space under the hood than production LS engines.

Note: this engine has the ignition coils mounted on the valve covers.

Specifications:
Power: 585 HP @ 6300 RPM, 570 ft. lbs. of torque @ 4700 RPM
Displacement: 454 CID, 7.4L
Bore x Stroke: 4.185” x 4.125”
Compression Ratio: 11:1
Recommended Fuel: 92 Octane
Block: LSX Cast Iron with 6 bolt cross bolted main caps
Crankshaft: 4340 Forged Steel, with 8 bolt flange
Connecting Rods: 4340 Forged Steel
Pistons: Forged Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .648” Intake / .648” exhaust
Cam Duration @ .050”: 236 deg. Intake / 246 deg. Exhaust
Lobe Separation: 110 Deg
Cylinder Heads: Aluminum LSX LS7 Rectangular style ports
Combustion Chamber: 70cc
Valves: 2.200” Intake/ 1.610” Exhaust
Rocker Arms: Cast Roller Trunion, 1.8:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6500

Engine and Trans Package Includes:
• Fully GM assembled long block
• Harmonic Balancer
• Front timing cover
• Holley Retro-Fit Oil Pan
• Oil Dipstick and Tube
• Chevrolet Performance pre-programmed engine controller and harness
• Ignition Coils & Custom Coil Brackets
• Spark Plugs, Wires & Looms
• Complete Production LS7 Intake with Injectors & Throttle Body
• Chevrolet Performance T56 Super Magnum 6 Speed Transmission(1st-2.66, 2nd-1.78, 3rd-1.30, 4th-1.00, 5th-0.80, 6th-0.63)
• RAM 12” Power-Grip HD Clutch & Pressure Plate
• RAM Steel 8-Bolt Flywheel with bolts
• Chevy Performance Hydraulic Throw-Out Bearing with fittings & bolts
• -4AN male pressure line adaptor fitting
• -3AN bleeder line kit with speed bleeder fitting and mounting bracket
• Forth-generation F-body-type bellhousing with hardware
• T56 Driveshaft Yoke
• Chevy Performance LS Pilot Bearing
• Plug for speedo gear hole
• Back-Up Lamp Switch Pigtail Connector
• Pigtail Connector for Speed Sensor
• 1st Gear Sensor Pigtail Connector
• Lokar Chrome 10” shifter lever with white shift knob and shifter boot

Warranty:
General Motors limited 2 year / 50,000 mile parts & labor warranty. Click on Document tab above for full details.

Related Engines and Components:
Pace Professional Engine Dyno Break-In & Testing
Ram 8-bolt Manual Trans Flywheel
GM 8-bolt Auto trans Flexplate
LS Engine Swap Packages
Complete Manual Trans Install Kits
Carbureted LSX454 Crate Engine
LSX454 Long Block
LS Serpentine Accessory Drive Systems and Components