19434600 - Chevrolet Performance DR525 Sealed Race Engine w/Muscle Car Oil Pan

Chevrolet Performance has released its latest factory-engineered LS high-performance sealed race engine - the DR525. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio - delivering 525 horsepower at 6,300 rpm and 489 lb.-ft. at 4,400 rpm.
Using the LS3 production engine - the same used in Corvettes and Camaros - as the foundation for the LS376/525 helped keep the retail price lower, while the ASA camshaft is a proven, power-building component that has been successful in the high-rpm world of circle track racing.
The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high rpm.
As delivered, the DR525 includes the intake manifold, with the injectors, fuel rail and throttle body already installed, along with the water pump and ignition system.
Chevrolet Performance installs Tamper Proof Bolts in the DR525 for affordable heads-up drag racing classes. These Tamper Proof Bolts are located (1) oil Pan, (1) front timing cover and (2) each side of intake manifold.
Specifications:
Power: 525 HP @ 6300 RPM, 489 ft. lbs. of torque @ 4400 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.060” x 3.620”
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .525” Intake / .525” exhaust
Cam Duration @ .050”: 226 deg. Intake / 236 deg. Exhaust
Lobe Separation: 110 Degree
Cylinder Heads: Aluminum L92 style ports
Combustion Chamber: 68cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600
Engine Includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Oil pump, pick-up and Camaro oil pan
• EFI Intake with fuel rails, injectors and throttle body
• Non-SFI 14” Auto Trans Flexplate
• Non-SFI Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• GM Muscle Car Oil Pan 19212593
• Oil Filter
• Passenger Side RH Oil Dipstick and Tube
Warranty:
This engine is designed for off road use only, GM warranties do not apply.
Related DR525 Components:
DR525 Engine Controller Package
Chevrolet Performance Air Intake Kit