SBC 383/430HP Chrome Finish Crate Engine with Tremec TKX 5 Speed Trans Combo Pace Performance GMP-TK6BP383-1

GMP-TK6BP383-1 - Pace SBC 383/430HP Chrome Finish Crate Engine with Tremec TKX600 5 Speed Transmission Combo Package.
Pace Performance Chevy 383 430HP Engine Includes:
• Pace engine prep and oil priming service. Click Here for more information.
• Fully assembled long block
• GM Licensed Chrome Valve Covers with Chevrolet Script
• Melling High Volume Oil pump, pick-up and oil pan
• Front timing cover with 8” timing pointer
• Oil Filter Adapter
• Edelbrock As Cast RPM Air-Gap Aluminum Intake Manifold
• Thermostat and Polished Aluminum Housing
• Hand built AED 750CFM Holley mechanical secondary carb with electric choke
• 8” Harmonic Balancer
• Performance Mechanical Fuel Pump
• Carb Fuel Inlet and Plumbing to Fuel Pump
• GM Licensed 14” Chrome Air Cleaner with Chevy Script
• Performance HEI Distributor
• Spark Plugs, Wires and Looms
• Long Aluminum Water Pump (short style pump available upon request)
• 14” HD Flexplate
• HD Performance Starter with bolts
• Includes Oil Filter and Pace Performance recommended break in oil: Shipped in Pan
Warranty:
BluePrint limited 30 month / 50,000 mile parts & labor warranty. Click Here to view or download warranty form.
We start with BluePrint Engines dyno tested long block crate engines and finish them off with top quality, name brand components. These complete crate engines are delivered to your door ready to run.
Specifications:
Power: 430 HP @ 5700 RPM, 450 ft. lbs. of torque @ 4400 RPM
Displacement: 383 CID
Bore x Stroke: 4.040” x 3.75”
Compression Ratio: 10:1
Recommended Fuel: 91 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps with passenger side oil dip stick hole, brass freeze plugs.
Crankshaft: Cast Steel, polished, stress relieved and shot peened with chamfered oil oils
Connecting Rods: Heavy Beam with 150,000 psi bolts
Pistons: Hypereutectic
Camshaft: Hydraulic Roller Tappet
Cam Lift: .528” Intake / .536” exhaust
Cam Duration @ .050”: 230 deg. Intake / 240 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Performance Aluminum
Combustion Chamber: 64cc
Valves: 2.02” Intake/ 1.60” Exhaust
Rocker Arms: Aluminum Roller, 1.5:1 Ratio
Valve Springs: 1.25” Diameter
Balance: External
Ignition Timing: Base 10 degrees BTDC, 32 degrees total

TREMEC's TKX series of 5-speed transmissions was first made famous by the 5-liter Mustang movement and has since been fitted into nearly every rear-wheel drive performance application imaginable.
Serving up 600 lb-ft of torque capacity, along with confidence-inspiring shifts and fuel-saving overdrive, the TKX offers an ideal blend of brute strength and street manners – which may be why it's the manual transmission behind more boulevard-bruising street machines and sportsman race victories than all of it's competitors combined.
2.87 1st, 1.89 2nd, 1.28 3rd, 1.00 4th,.82 5th, REV- 2.56
Pace TKX 600 Transmission Package Includes :
• TCET17722 Tremec TKX 600 5 Speed Transmission
• 14” Flywheel
• 11” Single Disc Clutch & Pressure Plate with Throw out Bearing
• Flywheel to Crank Bolts
• Transmission to Bellhousing Bolts
• Pilot bearing
• Aluminum Bellhousing
• Pressure Plate to Flywheel Bolt kit
• Clutch Fork Stud
• Speed Sensor Pigtail
• Neutral Safety Pigtail
• Ivory 5 Speed Gear Shift Knob
• 10” Chrome Shift Lever
• Shift Boot
• Slip Yoke
• 3-QT Synchromesh Transmission Fluid