Click on image to zoom

CPSLT1D6L80E - GM LT1 460HP Dry Sump Engine with 6L80E 6-Speed Auto Transmission Combo Package.

This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.

CPSLT1D6L80E
Sold
Shipping: No Longer Available

Description

New 6L80E Connect and Cruise Package

Pace Performance is breaking new ground with the launch of the new 6L80E Connect-and-Cruise crate powertrain systems. They're factory-engineered engine-and-transmission combinations that include all the electronic control modules, wiring harnesses and other key components you need with the simplicity of one part number. We've matched the engines and transmissions for optimal performance and durability, so you can wring out all the horsepower from them with total confidence. The specially calibrated controllers are designed for retrofit installation in older vehicles, for easier and quicker installation and operation, without the need for third-party tuning. Each one comes with an installation kit, including flex plates, covers and other important components to keep typical mid-project parts chasing to a minimum.

GM LT1 460HP Engine and 6L80E Package Includes:
• 19329997 LT1 460HP Dry Sump Engine
• 19303137 Engine Controller
• Pace Performance 6L80E 6-Speed Automatic Transmission Package
• Pace Pass-Thru Can & Tach lead harness Click Here for more information.

The Next Generation is Here!

Chevrolet Performance is proud to offer the all-new LT1 crate engine. Introduced on the seventh-generation Corvette Stingray, the LT1 6.2L opened the next chapter in the long, historic legacy of the Small-Block engine - and gives your project vehicle a high-tech heart transplant with an unprecedented balance of performance and efficiency!

The LT1 is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing to support an advanced combustion system.

The Chevrolet Performance LT1 crate engine is rated at 460 horsepower and 465 lb.-ft. of torque; and it is offered with a wet-sump or dry-sump oiling system. A controller specially designed for retro-fit application using an automatic transmission is available.

Specifications:
Power: 460 HP @ 6000 RPM, 465 ft. lbs. of torque @ 4600 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.065” x 3.622”
Compression Ratio: 11.5:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: 8-bolt Forged Steel
Connecting Rods: Forged Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Billet Steel Hydraulic Roller Tappet
Cam Lift: .561” Intake / .531” exhaust
Cam Duration @ .050”: 242 deg. Intake / 244 deg. Exhaust
Lobe Separation: N/A
Cylinder Heads: Aluminum Rectangular Port, Direct Injected
Combustion Chamber: 59cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.81:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600

Engine Includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Oil pump, pick-up and dry sump oil pan
• Exhaust Manifolds
• Intake, Injectors and Throttle Body
• High Pressure Fuel Pump (installed)
• 14” Auto Trans Flexplate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Oil Filter
• Passenger Side RH Oil Dipstick and Tube

Warranty:
General Motors limited 2 year / 50,000 mile parts & labor engine warranty and limited 1 year parts replacement only transmission warranty. Click Here to view or download warranty form.

This Pace Performance 6L80E Transmission Package is designed for "Plug and Play" use with Chevrolet Performance LS engine controllers.

Package Includes:

• GM 6L80E rear wheel drive, slip yoke style transmission assembly
• Torque Converter
• Oil Cooler Lines Manifold with -6 AN Male Fittings
• Converter dust shields and bolts
• Dipstick and tube
• Transmission ships with fluid plus 2 extra QTs
• Shift shaft lever & nut
• Bell housing & converter bolts
• Transmission harness
• Pace custom pre-programming of internal transmission ECU
• Slip yoke

6L80E Specifications and Features:

• Rated for maximum engine crankshaft torque 487 lb-ft (660 Nm)
• Gear Ratio • 1st - 4.03 • 2nd - 2.36 • 3rd - 1.53 • 4th - 1.15 • 5th - 0.85 • 6th - 0.67
• Programming includes Tap shift feature.
• Can be controlled by paddle shifters.
• See Documents Tab for transmission dimensions chart

Related Products

GMP-7613 Pace Performance 6L80e Floor Shifter Assembly with Tap Shift Control

Steering Wheel Paddle Shift Packages

Application List

Universal

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 800.0 lbs.
  • W36.0000” x H48.0000” x L40.0000”
  • Free Shipping!
  • This item will require a special quote for shipping charges.
  • No Longer Available

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.


Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours