Trans-Dapt Performance Products 55-78 Small Block into S10/V8 Swap Kit 99069

Engine Swap-In-A-Box Kit; Installs 1955-78 SB Chevy with FACTORY Heads in 1982-04 (2WD only) Chevy/GMC S10, S15, Blazer Vehicle Family; Standard-Duty, Mild Steel, 1-3/4 in. MID-LENGTH Tube Headers- UNCOATED Headers

TUBE DIAMETER 1-3/4 in.
COLLECTOR STYLE 3-Bolt Gasket Style Flange
AIR CONDITIONING Yes
AUTOMATIC TRANSMISSION - COLUMN No
AUTOMATIC TRANSMISSION - FLOOR Yes
MANUAL TRANSMISSION - COLUMN No
MANUAL TRANSMISSION - FLOOR No
BAFFLED Yes
CAPACITY 7 Qts.
COLLECTOR ATTACHMENT 3 in.
COLLECTOR SIZE 3 in.
REDUCER OUTLET SIZE 2-1/2 in.
EXHAUST SYSTEM DIA 2-1/2 in.
CONTENTS Headers; Engine Mounts; Oil Pan; related gaskets and Hardware
DRIVETRAIN 2WD
EMISSIONS NOTES NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
ENGINE Chevy SB 283-400; '55-79 (Gen 1)
ENGINE NOTES 1955-78 SB Chevy 283-400 (driver side dipstick)
FINISH Uncoated Headers
FINISH TYPE Uncoated
FLANGE THICKNESS 0.3125 in.
FLUID CAPACITY 7 Qt
HEAD STYLE Factory Profile
HEADER PORT SHAPE Oval Port
HEADER STYLE Mid-Length Tube
O2 SENSORS INCLUDED No
PAN CAPACITY 7 Qts.
PICKUP # 2509
PORT SHAPE Oval
POWER STEERING Yes
PRODUCT DETAILS Engine swap kit for installing a 1955-78 SB Chevy engine into 1982-2004 2WD Chevy/GMC S10/S15 Trucks
MATERIAL Mild Steel
SUMP STYLE Wet Sump
TRANSMISSION COMPATIBILITY Manual Transmission
TRANSMISSION COMPATIBILITY Automatic Transmission
TUBE DESIGN MID-LENGTH
TUBE MATERIAL THICKNESS 18g
TUBE SIZE 1-3/4 in.
DIPSTICK PORT Yes
SUMP LOCATION Rear
KICKED OUT No
HEAD TYPE Factory Heads
WITH A.I.R. SYSTEM No
WITH EGR No
OIL PAN DEPTH (IN) 9-1/4 in.
TUNED No
BOLTS/STUDS INCLUDED Yes
COLLECTOR BOLTS INCLUDED Yes
CRANK SHAFT WIPER INCLUDED Yes
DRAIN PLUG INCLUDED Yes
GASKET OR SEAL INCLUDED Yes
HEADER FASTENERS INCLUDED Yes
INSTALLATION HARDWARE INCLUDED Yes
MOTOR MOUNTS INCLUDED Yes
MOUNTING HARDWARE INCLUDED Yes
OIL PAN BOLTS INCLUDED Yes
OXYGEN SENSOR BUNG INCLUDED No
PICKUP INCLUDED Yes
REDUCERS INCLUDED Yes
WINDAGE TRAY INCLUDED Yes
Y-PIPE INCLUDED No
PRIMARY TUBE GAUGE 18g
PRIMARY TUBE DIAMETER (IN) 1.75 in.
PACKAGE CONTENTS Headers; Engine Mounts; Oil Pan; related gaskets and Hardware
HEADER MATERIAL Mild Steel
HEADER FINISH Uncoated
CYLINDER HEAD Factory Style
O2 PROVISION No
OIL PAN CAPACITY 7 Qt. Capacity
OIL PAN MATERIAL Steel
TRANSMISSION MOUNT TYPE Crossmember
PERFORMANCE Yes
TRANSMISSION TYPE Manual Transmission
TRANSMISSION TYPE Automatic Transmission
WHEEL DRIVE TYPE 2WD
VEHICLE USE Chevy/GMC S10/S15 Family; 1982-04
HEADER CONSTRUCTION MILD STEEL- Standard-Duty
REPLACEMENT HEAD FLANGE GASKET 27560