Click on image to zoom

19353405 - 6.0 Ltr - 366 C.I.D. - Remanufactured GM Engine - L76

This product may require vehicle validation(s) for proper fitment. Please contact us to confirm correct vehicle fitment and usage.

19353405
Pricing: $6,093.87

Customize Your Item

- Core Must Be Selected To Add Item To Cart -
 * required
Qty:
Free Shipping!

Description

Included Engine Content
Engine Block
Pistons
Crankshaft
Connecting Rods
Cylinder Head
Camshaft
Front Cover
Housing, Cr/Shf Rear Oil Seal
Valve Cover/Cam Cover
Valve lifter Oil Manifold (VLOM)
Oil Pan

Specific Information or Instructions:
Note: The remanufactured engine is built with two different designed oil pans.
Differences are the 1st design oil pan has threaded hole for oil level sensor; the 2nd design o/pan is without hole for the oil level sensor. Transfer oil pan or procure new, if required.
For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan.

Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new.
Install new crankshaft balancer bolt that is included with engine assembly.
Refer to instruction sheet p/n 19257177 for detailed information on components that are required to be transferred from the original engine assembly, or procured new.
Refer to instruction sheet p/n 89017902 for the general engine installation instructions for all engines.


Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new.
Install new crankshaft balancer bolt that is included with engine assembly.

The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required.

The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required.

The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers.

For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new.

For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness.

Application List

Universal

Details

Shipping Information

  • Item Requires Shipping
  • 200.0 lbs.
  • W29.5000” x H33.5000” x L23.5000”
  • Free Shipping!
  • This item will require a special quote for shipping charges.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.


Trusted Specialists GM engine & parts specialists
Located in the USA Owned, operated, & employed
Need Assistance? Call us at 888-748-4655
Mon-Thu 8am-6pm EST
Fri 8am-5:30pm EST
Have a Question Email us and we'll get back to you within 24 hours