Small Block Crate Engine by Pace Performance SP350/357 w/Black Trim GMP-19433032-2X

Chevrolet Performance SP350 357HP Turnkey Engine Includes:
• Fully GM assembled long block
• Black finned aluminum valve covers and air cleaner
• Black Edelbrock EPS intake manifold
• Edelbrock AVS Carb (natural or black finish)
• Oil pump, pick-up and oil pan
• Chrome Front timing cover
• Long water pump
• Fuel pump
• Harmonic damper
• Passenger Side RH Oil Dipstick and Tube

Note: This engine is shipped dry and requires oil system to be primed and valvetrain adjusted prior to initial start up. Harmonic balancer used will need to be checked for exact TDC (top dead center) location and timing pointer modified/adjusted to correct location.

Warranty:
General Motors limited 2 year / 50,000 mile parts & labor warranty. Click Here to view or download warranty form.

The SP350/357 is based on a tough, Chevy four-bolt block that holds a strong nodular iron crankshaft, good rods, and aluminum pistons. The high-lift camshaft gives the engine its own unique, aggressive idle. The cam is based on the same one found in 1965-67 Corvette 327 engines, but it has even more lift and duration.

Specifications:
Power: 357 HP @ 5500 RPM, 407 ft. lbs. of torque @ 4000 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00” x 3.48”
Compression Ratio: 9.0:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Cast Aluminum
Camshaft: Hydraulic roller
Cam Lift: .473” Intake / .473” exhaust
Cam Duration @ .050”: 215 deg. Intake / 223 deg. Exhaust
Lobe Separation: 108 Degree
Cylinder Heads: Vortec Cast Iron, 3/8” pressed-in rocker studs
Combustion Chamber: 64cc
Valves: .194” Intake/ 1.50” Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Valve Springs: 10212811
Balance: Internal
Maximum GM Recommended RPM: 5600
Ignition Timing: Base 10 degrees BTDC, 32 degrees total