LS Engine Swap Oil Pan & Remote SINGLE Oil Filter Base Combo Kit; VERTICAL Port SINGLE Filter Base; RED Oil Pan (5qt.)
The engine oil filter mounting boss is built into an LS engine's oil pan. Unless you are lucky enough to be able to utilize a factory LS pan, chances are, you are going to have to relocate the engine's oil filter. Hamburger's Performance Products offers a solution that simultaneously handles the oil pan and oil filter relocation requirements for these situations. Each kit includes a rear sump oil pan with pickup/gasket/bolts, remote oil filter base (single & double filter models available), oil lines, filter nipple(s) and 90 degree AN-10 fittings that attach to the AN fittings built into the pans.
BAFFLED No
CAPACITY 5 Qts.
COLOR RED
CONTENTS Pan, Pickup,Remote Filter Base, Oil Lines, Fittings, Nipple, Gaskets & Hardware
DEPTH 2 in. at front of Sump; 6 in. at Rear
ENGINE Chevy LS Series
CONSTRUCTION Stamped/Fab
ENGINE NOTES 4.8L, 5.3L, 6.0L GM LS Series Engines
FILTER BYPASS STYLE No Bypass. Special LS Swap Pan Use
FILTER NIPPLE THREAD SIZE 3/4 in.-16
FINISH RED Painted
PRODUCT TYPE Oil Pan / Filter Integration Kit Combos
IMPORTANT! NOT FOR DIESEL, MARINE OR RACE USE!
IMPORTANT! Some LS have dipstick in pan and will require drilling of dipstick port on block
KIT TYPE Oil Pan With LS Swap Filter Integration Kit
LENGTH 7 in.
WIDTH 8-1/4 in.
OIL FILTER COMPATIBILITY PH8A or Equivalent (or equivalent)
PAN CAPACITY 5 Qts.
PICKUP # 2522
PORT SIZE -10AN
MATERIAL Steel
REMOTE FILTER BASE STYLE SINGLE Filter, Vertical Port
REMOTE BASE FILTER SIZE PH8A (or equivalent)
SUMP STYLE Wet Sump
VEHICLE SPECIFIC LISTINGS LS engine into Early GM cars/trucks; 82-04 Chevy / GMC S10 / S15, Blazer / Jimmy
BYPASS MOUNTING STYLE No Bypass Adapter
FITTING MATERIAL Brass
FITTING TYPE Hose Barb
FITTING QUANTITY 4
HOSE CONNECTION TYPE Push Lock
HOSE OD 0.75 in.
HOSE LENGTH 30 in.
SUMP LOCATION Rear
KICKED OUT No
OIL PAN DEPTH (IN) 6 in.
CRANK SHAFT WIPER INCLUDED No
FASTENER(S) INCLUDED Yes
FILTER BYPASS INCLUDED No
GASKET OR SEAL INCLUDED Yes
HARDWARE INCLUDED YES
INSTALLATION HARDWARE INCLUDED Yes
NIPPLE INCLUDED Yes
OIL LINE KIT INCLUDED Yes
OIL PAN BOLTS INCLUDED Yes
PICKUP INCLUDED Yes
PLUG INCLUDED Yes
WINDAGE TRAY INCLUDED No
DIPSTICK PROVISION No
DRAIN PLUG THREAD SIZE 1/2 in.-20
OIL PAN CAPACITY 5 Qt. Capacity
OIL PAN FINISH Red Painted
OIL PAN MATERIAL Steel
FILTRATION CONSTRUCTION CAST Aluminum
STROKER CLEARANCED No
ENGINE MANUFACTURER Chevrolet
ENGINE OIL COOLER RETURN FITTING No
FITTING THREAD -10 AN
HOSE ID 1/2 in.
HOSE MATERIAL Flame Resistant Nitrile/Rubber
PRESSURE RATING 300 PSI
RACE ONLY No
SINGLE OR DUAL FILTER Single
TYPE Oil Pan with Remote Filter Kit
VEHICLE USE A-Body (GM) 1964-67
VEHICLE USE A-Body (GM) 1968-72
VEHICLE USE F-Body (GM) 1967-69
VEHICLE USE F-Body (GM) 1970-74
VEHICLE USE F-Body (GM) 1975-81
VEHICLE USE X-Body (GM) 1968-74
VEHICLE USE C10/C15 Trucks and SUVs; 1967-72
VEHICLE USE C10/C15 Trucks and SUVs; 1973-87
VEHICLE USE Chevy/GMC S10/S15 Family; 1982-04
REPLACEMENT GASKET SET 4336
REPLACEMENT NIPPLE 1034
REPLACEMENT OIL PAN 1108
CALIFORNIA PROPOSITION 65 WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
SUMP DIMENSIONS 6 in. Deep, 8.25 in. Wide,7 in. Long
REPLACEMENT FILTER RELOCATION KIT 1012
Total Reviews (0)
Write the First Review!