LS Engine SWAP IN A BOX KIT for LS in 75-81 F-Body with Manual Trans and Raw Headers Stainless Steel Trans Dapt 42234

Engine Swap-In-A-Box Kit; Installs a GM LS (Gen III/IV) and MANUAL Transmission in 1975-81 GM F-Body Cars (Chevy Camaro, Pontiac Firebird); T304 STAINLESS STEEL, 1-3/4 in., MID-LENGTH Tube Headers- UNCOATED Headers

TUBE DIAMETER 1-3/4 in.
TUBE STYLE Mid-Length
COLLECTOR STYLE BALL and SOCKET Style (Gasketless)
AIR CONDITIONING Yes
AUTOMATIC TRANSMISSION - COLUMN No
AUTOMATIC TRANSMISSION - FLOOR No
MANUAL TRANSMISSION - COLUMN No
MANUAL TRANSMISSION - FLOOR Yes
BAFFLED No
COLLECTOR SIZE 3 in.
REDUCER OUTLET SIZE 2-1/2 in.
EXHAUST SYSTEM DIA 2-1/2 in.
CONTENTS Headers; Engine Mounts; Transmission Crossmember; Oil Pan; Hardware and Gaskets
EMISSIONS NOTES NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.
ENGINE Chevy LS Series
FINISH Uncoated Headers
FLANGE THICKNESS 0.375 in.
PRODUCT TYPE Complete SWAP-IN-A-BOX Kits
HEADER PORT SHAPE Round
HEADER STYLE Mid-Length Tube
O2 SENSORS INCLUDED No
PICKUP # 2522
PORT SHAPE Round
POWER STEERING Yes
PRODUCT DETAILS Engine swap kit for installing an LS engine in 1975-81 F-Body
MATERIAL T304 Stainless Steel
SUMP STYLE Wet Sump
TRANSMISSION COMPATIBILITY T-56
TUBE DESIGN MID-LENGTH
TUBE LENGTH Mid-Length Tubes
TUBE SIZE 1-3/4 in.
VARIATIONS 42031, 42032, 42033.
INSTALLATION NOTES Pan has -10AN inlet / outlet ports, and requires relocation of the oil filter.
DIPSTICK PORT No
SUMP LOCATION Rear
KICKED OUT No
OIL PAN DEPTH (IN) 2 in. at front of Pan; 6 in. at Rear Sump
BOLTS/STUDS INCLUDED Yes
COLLECTOR BOLTS INCLUDED Yes
CRANK SHAFT WIPER INCLUDED No
DRAIN PLUG INCLUDED Yes
FASTENER(S) INCLUDED Yes
GASKET OR SEAL INCLUDED Yes
HEADER FASTENERS INCLUDED Yes
HEDMAN HEDDERS INCLUDED Yes
INSTALLATION HARDWARE INCLUDED Yes
OIL PAN INCLUDED Yes
OIL PAN BOLTS INCLUDED Yes
OXYGEN SENSOR BUNG INCLUDED No
PICKUP INCLUDED Yes
REDUCERS INCLUDED Yes
WINDAGE TRAY INCLUDED No
Y-PIPE INCLUDED No
PRIMARY TUBE GAUGE 16g
PRIMARY TUBE DIAMETER (IN) 1.75 in.
PACKAGE CONTENTS Headers; Engine Mounts; Transmission Crossmember; Oil Pan; Hardware and Gaskets
HEADER MATERIAL T304 Stainless Steel
HEADER FINISH Uncoated
CYLINDER HEAD Factory Style
O2 PROVISION No
OIL PAN CAPACITY 5 Qt. Capacity
OIL PAN FINISH Red Painted
OIL PAN MATERIAL Steel
TRANSMISSION MOUNT TYPE Crossmember
REDUCER OUTLET DIAMETER 2-1/2 in.
TRANSMISSION TYPE Manual Transmission
WELDING REQUIRED No
VEHICLE USE F-Body (GM) 1975-81
REPLACEMENT GASKET 27470
REPLACEMENT HEAD FLANGE GASKET Yes
REPLACEMENT HEADERS 62720
REPLACEMENT MOTOR MOUNT KIT 4203
REPLACEMENT MOUNT PADS 4209
REPLACEMENT OIL PAN 1108
CALIFORNIA PROPOSITION 65 WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
SUMP DIMENSIONS 6 in. Deep x 8.25 in. Wide x 7 in. Long