BP4002CTC1DK BluePrint Engines 400CI 508HP Crate Engine Carbureted Drop In Ready with Front Drive

HP & Torque: 508 HP / 473 FT LBS
Compression Ratio: 10.3:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.125" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

New BluePrint Forged Crankshaft
3.750" Stroke
OEM type 5.700" connecting rods w/ 150,000 psi bolts
Forged Pistons
Internal Front/ External Rear

Cylinder Heads:

BluePrint Aluminum Cylinder Heads - HP8103
64cc chamber
2.08" intake/1.60" exhaust valves
220cc intake/67cc exhaust runners

Cam Specs:

Cam Type: Roller
.555 Intake .576 Exhaust
236 Intake / 242 Exhaust duration
@ .050 - 110 ° lobe separation

Ignition Timing:

10-16° inital and total timing 32-34° at 3500 RPM

Also Includes:

Intake Manifold dual plane, satin aluminum
850cfm Carburetor
Distributor
Valve covers
Harmonic balancer
Spark plugs
Spark plug wires
Fuel Pump
Oil pan
Timing cover
Dyno tested and shipped with results
Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)


Warranty:

30 month / 50,000 mile

Notes:

NEW BluePrint block manufactured and machined in the USA!
Not for EGR
The Aftermarket intake manifold and heads installed on this engine may not be compatible with OEM accessory brackets that use intake or exhaust mounted bosses.