E632 BluePrint Engines 632 CI 700HP Eliminator Chevy Big Block Eliminator Power Adder Stroker Engine

The old adage of “there’s no replacement for displacement” is becoming … dare we say old? These days naturally aspirated engines just aren’t enough for some – and we are here for it!


HP & Torque: 700 HP / 650 FT LBS Naturally Aspirated
Compression Ratio: 9.6:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.600" Bore
1-Piece Rear Main Seal
Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)

Rotating Assembly:

New BluePrint Forged Crankshaft
4.750" Stroke
Forged H-beam 6.635" connecting rods
ARP 2000 series bolts
Mahle Motorsports Forged Pistons
Precision Gap, Power Adder Piston Rings
Internally balanced

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8012
119cc chamber
2.30" intake/1.88" exhaust valves
358cc intake/125cc exhaust runners
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
MLS Head gaskets

Cam Specs:

Cam Type: Roller
.698 / .698 Lift
272 / 282 duration @ .050 - 110 degree LSA

Also Includes:

Valve covers, oil pan and timing cover
Dyno test results shipped with engine
SFI Rated Dual Keyway 8 in. Balancer

Warranty:

12 Month Replacement Guarantee

*The BluePrint Engines replacement guarantee for all engine part numbers that begin with the letter E is as follows: If during the first 12 months after installation your engine fails for any reason, you can return that engine to BluePrint Engines and we will rework your engine for the cost of parts required. All labor to pull the engine, freight to BluePrint Engines and the cost of Parts, which BluePrint Engines deems necessary to rework the engine, are the responsibility of purchaser. The costs to determine what needs replaced, order the parts, recondition/assemble the engine, dyno test the refreshed engine and ship the product back to the purchaser will be covered by BluePrint Engines.



Notes:

Built and designed for Power Adder applications. Dual keyway crankshaft included.



Not for use in pollution controlled vehicles.
This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
Harmonic balancer is NOT included on this engine