Boost Your 1964-1967 Chevelle Performance with FiTech Fuel Injection Total Package
Transform your 1964-1967 Chevelle with the FiTech Fuel Injection System Total Package. These kits are designed to make it easier for classic Chevy and Mustang owners to upgrade to EFI, enhancing reliability with a single part number.
The new Total Package EFI swap kits feature FiTech’s proven Easy Street 600-horsepower throttle body as the heart of the system, delivering smooth and reliable performance. In addition, the kits include a new direct-fit fuel tank with an internal pump module, a high-pressure internal fuel pump, and a complete steel braided hose kit to get the fuel to the classic gold-finished throttle body. A high-flow serviceable filter and AN-style fittings are also included, making all of the connections for installation a breeze.
The FiTech Fuel Injection System is designed to give your Chevelle optimal fuel efficiency and control. With improved acceleration, throttle response, and overall performance, you’ll enjoy a smooth, consistent idle and crisp throttle response. The in-tank fuel pump ensures that your engine always has the fuel it needs to perform at its best.
The FiTech Fuel Injection System is easy to install and comes with all the necessary components. It’s designed for the ultimate driving experience, with self-learning calibration capabilities and built-in diagnostics. This Total Package is the perfect upgrade for your classic 1964-1967 Chevelle.
Now with FiTech’s unmatched 3-year limited warranty and everything you need under one part number, it’s never been easier to make the switch to Fuel Injection. Improve your Chevelle’s performance with the FiTech Fuel Injection System Total Package and experience the difference!
Kit Features:
30005 FiTech Easy Street 600HP EFI System
With a classic gold finish, this Go Street system may have the looks of a factory carb, but the similarities end there. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to fire up. The Easy Street accepts the tach signal from the coil negative, an HEI distributor or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture resulting in smooth performance from idle to high rpm
Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 600 HP with a 4-barrel intake manifold. For non boosted engines naturally aspirated applications only.
Replacement for any 4-barrel carburetors for engines with 200 HP up to 600 HP.
Use the same size air cleaner you would normally use for your 4-barrel carburetor.
Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into vehicles that do not require emission controls.
Features:
1 BAR internal MAP sensor.
Suitable for up to 600hp.
(4) Flow matched injectors.
(1) Fan control.
Built-in pressure regulator.
Classic carb gold finish.
Throttle Body Kit Contents:
(1) Die-cast throttle body.
(1) O2 bung kit.
(1) Hand-held controller.
(1) CTS sensor.
(1) Hand-held controller cable.
(1) CTS adapter.
(1) Windshield mount.
(1) Mini USB cable.
(1) 4+2-Pin Connector.
(1) Return plug.
(1) O2 sensor.
(1) Gasket kit.
58034 1964-67 Chevelle & Malibu Fuel Injection Gas Tank
1964-67 Chevelle, Malibu and Pontiac Beaumont EFI Fuel Tank
Fuel Injection Ready!
EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation.
Perfect for your Pro-Touring, Autocross or Road Racing Ride
51003 Natural Stainless Steel Hose Kit, 40ft w/ 10 Micron Filter and Check Valve
These fuel line kits are perfect for plumbing your car with beautiful, chemical resistant natural or black stainless steel braided fuel lines. These fuel lines and fittings are perfect for any fuel delivery application where you want to use pump has, methanol, ethanol, or alcohol. Plus they come with the best AN fittings around.
Kit includes 40ft natural stainless steel braided hose with (3) 90 degree -6 fittings, (3) 45 degree -6 AN fittings and (6) straight -6 AN fittings with a 10 micron fuel filter and inline check valve.
60002 Go EFI Throttle body Install Hardware Kit
Carb Studs
Aircleaner Reducer 5/16 to 1/4
1/2 Inch Throttle Bushing
Total Reviews (0)
Write the First Review!