PSLS3760SCTKB BluePrint Engines LS 376 c.i. Supercharged 700 HP Deluxe Dressed with Black Pulley Kit Electronic Fuel Injected

Description:

Horsepower & Torque: 700 Horsepower / 640 FT LBS
Compression Ratio: 9.5:1
Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Forged Pistons

Block:

New GM Aluminum 6.2L block
OEM Block Machined in the USA!
1-Piece Rear Main Seal
4.070" Bore

Rotating Assembly:

Nodular Iron Crankshaft
3.622" Stroke
6.098" Forged Connecting Rods w/ 150,000 PSI Bolts
Forged Pistons
Internally Balanced

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8015
72cc Chamber
2.165" Intake / 1.600" Exhaust Valves
259cc Intake / 102cc Exhaust Runners

Cam Specs:

Cam Type: Roller Cam
.612 Intake / .585 Exhaust Lift
225 Intake / 238 Exhaust Duration
@.050-113 Degree Lobe Separation

Ignition Timing:

 Controlled by Powertrain Control Module

Also Includes:

3.0L Whipple Supercharger
Complete ECU, Harness, Pedal engine controller kit. 
Oil Pan
Intake Manifold
Fuel Injectors and Rail
Coil Packs
Spark Plugs and Wires
Water Pump
Harmonic Balancer 
Front Accessory Drive with Water Pump, Alternator, Power Steering Pump, and A/C Compressor 

Notes:

The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.