Orders may take longer than usual to process due to manufacturers having issues receiving and shipping parts. If you need to know if a part is in stock, please call prior to placing your order. We are doing everything within our control to ship orders as soon as possible.
For 1987-1995 Chevy/GMC trucks with 350 vin code "K" engine
Specs on this engine are as follows:
1986 and up 4 bolt main 1 piece crankshaft seal block
Horsepower - 200HP @ 4000RPM
Torque - 300FT/LBS @ 2800RPM
Forged steel crankshaft
Powdered metal connection rods
Dished hypereutectic pistons
9.25:1 Compression ratio
High volume oil pump
Morse link type timing chain
Casting number 14102193
Swirl port intake port design
64cc Combustion chamber
1.94" Intake valve 1.50" Exhaust valve
Valve spring part number is 3911068 (same spring used with the old 300hp 350 crate engine)
Installed height 1.70" Pressure @ Installed height is 80 LBS * Pressure with valve open is 267 lbs.
These springs are good for .550" lift but clearance between guide and retainer must be double checked before attempting.
7 Bolt exhaust flange
Center bolt valve cover flange
1987-1995 Intake manifold bolt pattern with center intake bolts canted @ 72 angle
This cylinder head is not a performance oriented cylinder head. It is classified as a high swirl head that was intended for good bottom end torque and fuel economy. The intake runner is restrictive because it has a ramp cast into the bottom of the bowl to promote high swirl.
Engine also includes:
Write the First Review!