19302410 - Chevrolet Performance Automatic Transmission Controller Kit - Pre Programmed For 1993-UP 4L80E Transmission And E-67 Controller (LS3, LS7 Etc)

The Chevrolet Performance Parts Automatic Transmission Controller is a fully programmable transmission control system. Through a friendly PC Windows interface users are able to program transmission settings based on speed, engine load, engine speed and other parameters.

• Pre-programmed - provides full function transmission operation after completing connections
• No laptop programming required
• Only compatible with E-67 based Chevrolet Performance electronic LS engine control systems
• Optional features for personal preferences
  • Gearshift timing
  • Multiple shift patterns
  • Manual shift mode
  • Supports most "Tap Shifters" or wheel-mounted paddles
  • On-Board data logging
• Connect and Cruise - simple connections with no additional wiring required. Connect the clearly marked leads to the engine control harness, and you're ready to cruise!

• Many special operating modes available including, manual mode for upshift/downshift button capability (paddle shifting and button shifting)
• Durable 56-pin weather sealed circular plastic connector built into case
• All components specified for automotive conditions (125 degrees C with fuel, grease, and oil resistance).
• 4 PWM Driver outputs (Selectable 12v or ground output) (3amp)
• 2 frequency inputs (Engine Speed, TC Speed, Driveshaft speed, additional speed)
• RS 232, USB, CAN (2.0b) communications
• 8 Digital Inputs
• 4 Analog Inputs
• Easy to use windows software interface
• Data logging capability
• Compact Dimensions (5.3in x 3.7in x 1.5in)

  Supported Transmissions

  GM 1993-UP 4L80e family
  GM 4L85E

  The transmission controller is designed to control a transmission. The transmission controller is not designed to function in a factory environment. It does not communicate with factory body control modules, engine control modules, modern dashboards, or vehicle communication networks. If you remove your factory transmission controller, your check engine light will turn on. Many factory functions, such as cruise control, may not work. The engine may run in a limp mode. The TCU is a stand-alone transmission controller. It can not tell (and doesn't care) whether the transmission is connected to a fuel-injected engine, a carbureted engine, or even an electric motor. If components on your vehicle are expecting to see a transmission and a transmission controller then you must first overcome those issues before purchasing a controller. A simple test is to unplug the transmission and factory transmission controller connectors and observe if there are any problems. If you would like to install the transmission controller in a factory environment, we strongly recommend you work with a dealer who has experience with installing the Chevrolet Performance transmission controller in that vehicle. Chevrolet Performance does not provide support for vehicle-specific issues that may arise when using the transmission controller.

  Minimum Computer Requirements
  Processor: Pentium 200MHz or above RAM: 24MB
  OS: Windows 98, ME, NT, 2000, XP (32 and 64-bit), Vista (32 and 64-bit), Windows 7, Windows 8
  Hard Drive Space: 20MB for install, additional space for data logs & calibrations
  Video: 800x600 or greater resolution
  Peripherals: CD-ROM or internet connection required to obtain software
  Comm Port: The TCU communicates using a 9-pin RS-232 serial communication port. Please note that most new laptops do not have this port. If your laptop does not have this port, a USB to Serial Port Adapter is included. If you use the USB to serial adapter, you absolutely MUST run the CD that came with the adapter before you plug it into the computer. Failure to run the USB to serial adaptor CD before plugging in the adapter will prevent communication to the TCU.