UMI PERFORMANCE 1978-1988 GM G-Body Rear Coilover Kit, Control Arm Relocation, Stock Height 3064-150

UMI's bolt-in rear coilover kit allows full ride height, spring rate and damping adjustability for your 1978-1988 GM G-Body. The upper mount reinforcement is a direct bolt-in and holds a true 2-┬╜" racing coilover with T-Bar. The FEA designed lower bracket bolts in using the standard trailing arm mounting hole as well as an additional reinforcement hole normally used by the standard rear shock. The lower bracket features a multi-position design to allow further fine tuning of ride height and shock location (┬▒┬╛"). The Viking shock is 19-way adjustable in both compression and rebound and ensures the perfect setting for every application. The 2-┬╜" coilover springs are available in 14" 110lb for drag and street use and 12" 150lb for street and handling use. In addition to shock location adjustability, the UMI 3064 features three positions of trailing arm location adjustment to fine tune instant center. This adjustment is popular on lowered cars, for drag racing traction, or whenever a geometry change is desired. There is no cutting required and your car can be returned to stock if desired. 100% designed, manufactured and raced out of Philipsburg, PA-USA and always US materials.

Made in the USA!