Heatshield Products 140020 LS1 Intake Manifold Heat Shield

I-M Shield significantly reduces the amount of heat transfer from the top of the engine to the intake manifold, helping to reduce air-intake temperatures and increase horsepower. Lower air-intake manifold temperatures create a denser air/fuel mixture, creating more power. Heavy-duty adhesive will stick to any clean, semi-smooth surface. Simply degrease the surface, wipe with pre-paint cleaner or isopropyl alcohol, let it dry, then firmly press the I-M Shield onto the underside of the intake manifold. Use the provided edging tape to finish the installation of this intake manifold heat shield. I-M Shield is available pre-cut for certain applications and in a universal kit that may be trimmed for a custom fit. Think of I-M Shield as an intercooler for your intake manifold, reducing the temperature of the air/fuel inlet charge for higher density and more power. Patent Pending.

Features:

Withstands 1100 degrees F radiant continuous

Best dollar per RWHP around

Adhesive good for 300 degrees F

Lowers intake temperatures

Application: 1997-2007 GM LS1 LS2 LS6

Operational Temperature: 1100 Degrees F

Peak Temperature (30 seconds or less): 2000 Degrees F

Color: Silver/Aluminum

Material: Aluminum/Fiberglass

Made in the USA

Sold As A Kit
Installation Tips:

Clean surface before installation

Wipe with pre-paint cleaner

Radiant heat barrier requires 1 Inch of airspace

Not designed for direct contact
Warnings:

Always wear safety glasses

Dust mask, gloves and long sleeves are recommended when handling this product

Caution! This material is electrically conductive

Be sure to insulate any terminals that might come in contact with this product
Installation instructions are in the documents tab above