Resources

Pace Professional Dyno

  • Full Blown Dyno Testing
    (Available on all fully Dressed Engines)
  • Pace Prime and Prep Service
    (Available on any Pace Performance Engine)
  • Pace Prime and Prep Package Pace Prime and Prep Package

    Pace New Engine Prep and Oil Priming Service (most commonly performed on long block crate engines that do NOT include an intake manifold)

    The performance, drivability and longevity of your new engine are determined with proper engine preparation. New & remanufactured engines come to us without oil and with minimal assembly lubrication. To insure/enhance quality and dependability, the following procedure(s) are preformed prior to final engine dress and shipping.

    • All external engine bolts, fasteners and pipe plugs are checked for proper torque spec.
    • Pipe plugs are added as needed.
    • Bolt holes are checked with proper bolt size.
    • Cylinder head bolts are checked for proper torque spec. Bolts are NOT re-torqued but checked slightly below spec (excludes any fasteners requiring torque angle procedure).
    • Harmonic balancer is checked for exact TDC (top dead center) location and timing pointer is modified/adjusted to correct location. We commonly see up to a 4 degree variance which can cause internal engine damage.
    • Valvetrain is disassembled and we apply a coating of zinc enhanced assembly lube to all metal to metal surfaces.
    • Install oil filter and fill crankcase with break-in oil.
    • During the oil priming process the crankshaft is rotated in ¼ turns for two full rotations. This insures complete oil gallery alignment throughout the engine and gives the camshaft a 360 degree coating of break-in grease.
    • Rocker arms and valve train is adjusted.
    • All external engine ports are covered and engine is bagged and re-crated.
  • New Crate Engine Dyno Testing New Crate Engine Dyno Testing

    This service includes all the steps performed in our New Engine Prep and Oil Priming Service

    • Engine is installed on the dynamometer.
    • Cooling and fuel system is filled and checked for leaks. 
    • Engine oil level is re-checked. 
    • Engine is started and timing is set to manufacturer’s specification. 
    • Engine is run with various loads applied by the dyno. This eliminates ring chatter which can cause non-repairable damage to the cylinder walls. 
    • Engine is run approximately 30 minutes or more and then allowed to cool for final inspection.
    • A minimum a two performance pulls are performed to provide comprehensive base line.
    • Any openings to the internal parts of the engine will be covered or plugged.
    • Engine will be bagged and sealed then installed in a shipping container.
    • Engine dyno sheet, invoice and any other documents will be bagged and attached inside shipping container.

Circle Track Racing

Featured Products 55/70 Amp, Single Wire Alternator,... read more »

15050115P200

Current DIRTcar approved distributor / s Pace Performance Engine Serial Number AA058628 --> Approved Upfitter: Pace Performance Date sold: Feb 9, 2016 Date shipped: Feb 17, 2016 Sold to: Beau Brandt Pace Invoice: 67260 GM Serial Number: 15050115P200 Seal locations and seal number: read more »
  • RR Intake Manifold to Cylinder Head: 0002452 RR Intake Manifold to Cylinder Head: 0002452
  • LR Intake Manifold to Cylinder Head: 0002451 LR Intake Manifold to Cylinder Head: 0002451
  • RH Cylinder Head Bolt 6 & 7: 0002450 RH Cylinder Head Bolt 6 & 7: 0002450
  • LH Cylinder Head Bolt 6 & 7: 0002449 LH Cylinder Head Bolt 6 & 7: 0002449
  • Timing Cover both top bolts: 0002448 Timing Cover both top bolts: 0002448
  • Oil Pan RF under fuel pump mount: 0002447 Oil Pan RF under fuel pump mount: 0002447
  • Pace Tracking Seal LF Intake: 003 Pace Tracking Seal LF Intake: 003
  • Cable installation verified by: Don Blackshear Date:

Air Filter

Air Filters

Checkout our great selection of Air Filters from Airaid, Edelbrock, Holley, K&N, Moroso, Mr. Gasket, Trans-Dapt, Volant and Weiand brands.

Shop Air Filters

Shop Air Filter Brands


  • Weiand Weiand

    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro–Stock champion. Holley's products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl's, Holley products can give you the edge you need over the competition.

    Shop Brand »
  • Volant Performance Volant Performance

    Not all intake systems are the same and savvy customers know which ones make more power than others. This is why Volant Cool Air Intakes are extremely popular with customers who know intake systems. What's the difference? Volant Cool Air Intakes take a different approach to making power. Volant seals conical, high-flow air filter in a box that has more air volume than factory units. This process also eliminates any chance of hot air from contaminating the intake charge to the engine. Volant has had a tradition of designing and manufacturing high-quality intake systems that are constantly tested and improved upon as vehicle models and ECM system become more sophisticated. Volant is also at the cutting edge of air intake performance with new designs that make more consistent horsepower and torque for a variety of truck and sport utility vehicle applications. With Volant the quality of components are extremely high and every system includes stainless steel hardware and high-temperature silicone sleeves that do not flex or distort, even under the most extreme conditions.

    Shop Brand »
  • Trans Dapt Performace Products Trans Dapt Performace Products

    Willie Garner, the founder of Trans-Dapt Performance, began his fledgling company manufacturing and selling transmission adapters out of his garage. Mr. Garner became so well known for his quality adapters, it wasn’t long before he hired a “right hand man” to do the manufacturing, while Willie went out on the road, selling his product. With Willie’s philosophy of providing a wide selection of quality products at a fair price, Trans-Dapt soon became THE company to call, whenever you needed a transmission, carburetor or oil filter adapter, and within just 4 years, the two man shop in a garage was filling up 40,000 square feet of office, warehouse and manufacturing space. In 2009, that will be 50 years ago... Today, Trans-Dapt Performance Products, which is now part of the Hedman group of performance companies, resides in a 100,000 square foot facility using the latest in CNC machining and CAD design to ensure that Willie Garner’s philosophy of providing quality performance parts is not compromised.

    Shop Brand »
  • Mr. Gasket Mr. Gasket

    The Prestolite Performance Group is the only stop you need to make for all of your automotive performance needs. We are a manufacturer, not just a re-distributor of products. We conceptualize, develop, manufacture and market our products in our own facilities, where actual enthusiasts are involved in the process first-hand. Our alliances with proven top engine builders and performance product development specialists have allowed us to offer the most high-tech products available. With a few diversified brands in our family, we offer a wide spectrum of race-proven products to make your car look better and go faster. From ignition products to gaskets, suspension, clutches and everything in between, we’ve got your performance needs covered.

    Shop Brand »
  • Moroso Performance Moroso Performance

    At Moroso, we are committed to preserving my Dad’s legacy of building the best American Made performance products your money can buy, by our heavy investment in research and development. In 2008 we upgraded our in-house engine Dyno which allows our Research & Development Department to design and test components with more precision and reliability than ever. When you purchase a Moroso Oil Pan you can feel comfortable in knowing that our oil pans designs have had a workout on the Dyno and have been tested against competitors products. Our commitment to development does not stop there. This year alone our company has added a new Dodge Challenger SRT8 and a Mustang GT to our in house test fleet. Assuring our customers that the products we offer fit the first time and are of O.E.M. or better quality. As innovators, we are the first to offer custom fit, ready-to-ship Roll Cages and Roll Bar Kits for ’08- up Challenger and ’05- up Mustang owners as an option to costly, full-custom installs without sacrificing safety or quality. These two in-house test cars allow Competition Engineering to continue to bring to market the best chassis components for the latest performance models.

    Shop Brand »
  • K&N Filters K&N Filters

    K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. From humble beginnings as a family run business over 35 years ago, K&N Engineering, now a truly global company with offices in the U.K. and the Netherlands, continues to exist as a family owned business with an enthusiast mindset and a direct connection with motor sports that carries over throughout all levels of management and manufacturing. Today, K&N exists as both the sales and brand leader for performance filters, and maintains a stocking catalogue of over 3,500 part numbers, including an extensive line of both factory replacement drop-in filters, FIPK (Fuel Injection Performance Kit) applications, and its line of innovative Performance Gold oil filters.

    Shop Brand »
  • Holley Performance Holley Performance

    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro–Stock champion. Holley's products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl's, Holley products can give you the edge you need over the competition.

    Shop Brand »
  • Edelbrock Edelbrock

    When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there’s no way to stand behind your product with confidence. That’s why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It’s fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there’s our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production.

    Shop Brand »
  • Airaid Airaid

    Build it better. That’s the American ingenuity behind many of today’s successes in the automotive aftermarket industry and the story behind AIRAID Premium Filters. The company was founded in 1997 when it began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. The original AIRAID Intake System combined an open-element filter with an intake tube to make an easy-to install air intake kit that dramatically increased air flow, improved performance and generated more horsepower and torque. AIRAID Premium Filters consist of multiple layers of cotton-gauze plus one layer of synthetic fiber material called SynthaFlow, sandwiched between either stainless steel or aluminum mesh, depending upon the application. The casing of the filter is hand-poured urethane, which offers superior performance and durability, and won’t shrink or crack from prolonged heat exposure under the hood. Superior filtration and flow, thanks to the SynthaFlow material, is what makes AIRAID Premium filters better than the rest.

    Shop Brand »

Air Intakes

Want to increase power and gas mileage, Pace Performance offers increased performance and mileage improvement. Cold Air Intakes are used to bring your engine cooler, non-restricted flowing air from your engine bay. Cooler air is denser with more oxygen per square foot than warm air making your engines ignition of fuel more efficient Improving Gas Mileage while Improving the Performance of your car, truck, van, or suv. Available for most vehicles and applications include Chevy,... read more »
  • Volant Performance Volant Performance

    Not all intake systems are the same and savvy customers know which ones make more power than others. This is why Volant Cool Air Intakes are extremely popular with customers who know intake systems. What's the difference? Volant Cool Air Intakes take a different approach to making power. Volant seals conical, high-flow air filter in a box that has more air volume than factory units. This process also eliminates any chance of hot air from contaminating the intake charge to the engine. Volant has had a tradition of designing and manufacturing high-quality intake systems that are constantly tested and improved upon as vehicle models and ECM system become more sophisticated. Volant is also at the cutting edge of air intake performance with new designs that make more consistent horsepower and torque for a variety of truck and sport utility vehicle applications. With Volant the quality of components are extremely high and every system includes stainless steel hardware and high-temperature silicone sleeves that do not flex or distort, even under the most extreme conditions.

    Shop Brand »
  • Moroso Moroso

    At Moroso, we are committed to preserving my Dad’s legacy of building the best American Made performance products your money can buy, by our heavy investment in research and development. In 2008 we upgraded our in-house engine Dyno which allows our Research & Development Department to design and test components with more precision and reliability than ever. When you purchase a Moroso Oil Pan you can feel comfortable in knowing that our oil pans designs have had a workout on the Dyno and have been tested against competitors products. Our commitment to development does not stop there. This year alone our company has added a new Dodge Challenger SRT8 and a Mustang GT to our in house test fleet. Assuring our customers that the products we offer fit the first time and are of O.E.M. or better quality. As innovators, we are the first to offer custom fit, ready-to-ship Roll Cages and Roll Bar Kits for ’08- up Challenger and ’05- up Mustang owners as an option to costly, full-custom installs without sacrificing safety or quality. These two in-house test cars allow Competition Engineering to continue to bring to market the best chassis components for the latest performance models.

    Shop Brand »
  • K&N Filters K&N Filters

    K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. From humble beginnings as a family run business over 35 years ago, K&N Engineering, now a truly global company with offices in the U.K. and the Netherlands, continues to exist as a family owned business with an enthusiast mindset and a direct connection with motor sports that carries over throughout all levels of management and manufacturing. Today, K&N exists as both the sales and brand leader for performance filters, and maintains a stocking catalogue of over 3,500 part numbers, including an extensive line of both factory replacement drop-in filters, FIPK (Fuel Injection Performance Kit) applications, and its line of innovative Performance Gold oil filters.

    Shop Brand »
  • Edelbrock Edelbrock

    When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there’s no way to stand behind your product with confidence. That’s why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It’s fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there’s our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production.

    Shop Brand »
  • Airaid Airaid

    Build it better. That’s the American ingenuity behind many of today’s successes in the automotive aftermarket industry and the story behind AIRAID Premium Filters. The company was founded in 1997 when it began developing and manufacturing air intake systems for light trucks and SUVs, utilizing the cotton-gauze filter technology that was available at the time. The original AIRAID Intake System combined an open-element filter with an intake tube to make an easy-to install air intake kit that dramatically increased air flow, improved performance and generated more horsepower and torque. AIRAID Premium Filters consist of multiple layers of cotton-gauze plus one layer of synthetic fiber material called SynthaFlow, sandwiched between either stainless steel or aluminum mesh, depending upon the application. The casing of the filter is hand-poured urethane, which offers superior performance and durability, and won’t shrink or crack from prolonged heat exposure under the hood. Superior filtration and flow, thanks to the SynthaFlow material, is what makes AIRAID Premium filters better than the rest.

    Shop Brand »

Carburetor

Carburetor

Checkout our great selection of Carburetors from Edelbrock, Holley Performance, Holley Reman, Jet Performance, and Proform.

Shop Carburetors

Shop Carburetor Brands


  • Jet Performance Jet Performance

    Jet Performance Products is a proven leader in automotive tuning technology. Our background in tuning started with Jones Performance Fuel Systems over 40 years ago. Our Fuel Systems Division has given us the opportunity to tune everything from NHRA drag race cars, off-road race trucks and Sprint Cup cars. This experience has been the basis for our line of performance tuning products for street applications. JET's engineering staff is unsurpassed and considered to be the best tuners in the industry. Our talented staff has made the company what it is today. Constant changes in computer technology of today's cars and trucks demand that the JET engineering staff be the best. Automotive computer systems progress daily, just like every form of technology, so we are dedicated to providing the customer with the latest in performance tuning technology possible.

    Shop Brand »
  • Holley Performance Holley Performance

    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro–Stock champion. Holley's products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl's, Holley products can give you the edge you need over the competition.

    Shop Brand »
  • Edelbrock Edelbrock

    When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there’s no way to stand behind your product with confidence. That’s why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It’s fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there’s our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production.

    Shop Brand »

Exhaust Header

Checkout our great selection of Exhaust Headers from Edelbrock, Flowtech, Hedman Hedders, Hooker Headers, Husler Hedders, Trans-Dapt Performance Products, and Volant Performance. Shop Exhaust Headers Shop Exhaust Header Brands read more »
  • Volant Performance Volant Performance

    Not all intake systems are the same and savvy customers know which ones make more power than others. This is why Volant Cool Air Intakes are extremely popular with customers who know intake systems. What's the difference? Volant Cool Air Intakes take a different approach to making power. Volant seals conical, high-flow air filter in a box that has more air volume than factory units. This process also eliminates any chance of hot air from contaminating the intake charge to the engine. Volant has had a tradition of designing and manufacturing high-quality intake systems that are constantly tested and improved upon as vehicle models and ECM system become more sophisticated. Volant is also at the cutting edge of air intake performance with new designs that make more consistent horsepower and torque for a variety of truck and sport utility vehicle applications.

    Shop Brand »
  • Trans Dapt Performace Products Trans Dapt Performace Products

    Willie Garner, the founder of Trans-Dapt Performance, began his fledgling company manufacturing and selling transmission adapters out of his garage. Mr. Garner became so well known for his quality adapters, it wasn’t long before he hired a “right hand man” to do the manufacturing, while Willie went out on the road, selling his product. With Willie’s philosophy of providing a wide selection of quality products at a fair price, Trans-Dapt soon became THE company to call, whenever you needed a transmission, carburetor or oil filter adapter, and within just 4 years, the two man shop in a garage was filling up 40,000 square feet of office, warehouse and manufacturing space. In 2009, that will be 50 years ago... Today, Trans-Dapt Performance Products, which is now part of the Hedman group of performance companies, resides in a 100,000 square foot facility using the latest in CNC machining and CAD design to ensure that Willie Garner’s philosophy of providing quality performance parts is not compromised.

    Shop Brand »
  • Husler Hedders Husler Hedders

    Hedman Husler Hedders is widely known as a manufacturer of drag racing exhaust components for the last 50 years, including a strong focus on the NHRA. That commitment and focus on racing has expanded in the last few years to the stock car level.

    Shop Brand »
  • Hooker Headers Hooker Headers

    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro–Stock champion. Holley's products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl's, Holley products can give you the edge you need over the competition.

    Shop Brand »
  • Hedman Hedders Hedman Hedders

    Hedman Hedders, began as a one man shop in 1954. Bob Hedman, founder of Hedman Hedders, sold his highly sought after exhaust tubes to fellow racers on the salt flats of the Mojave Desert. But, what started out as a way to make a few bucks to pay for Bob’s racing hobby, quickly turned into the premier hedder manufacturer for both the racing and street hedder marketplaces. Originally designed for straightline drag racers, word spread quickly about Hedman’s reputation for building hedders that gave you the best boost in power for your dollar. It wasn’t long before Hedman Hedders was the brand of choice among racing’s elite engine builders, racers and race series. Familiar names like Don Garlits, Warren Johnson, Shirley Muldowney, Bob Chandler and his BIG FOOT Race Team, and the IROC series.

    Shop Brand »
  • Flowtech Flowtech

    Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro–Stock champion. Holley's products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl's, Holley products can give you the edge you need over the competition.

    Shop Brand »
  • Edelbrock Edelbrock

    When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there’s no way to stand behind your product with confidence. That’s why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It’s fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there’s our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production.

    Shop Brand »

Online Catalogs

Download our print catalogs so you can browse as you please. You can also order our current print catalog for FREE!
  • PIAA Wiper Blade Application PIAA Wiper Blade Application    2011-WiperAppGuide.pdf Find wiper blades for your vehicle!
  • Pace Performance Tools Catalog Pace Performance Tools Catalog Order the right tools to to get the job done. We have the best selection of high quality tools to do the job right the first and every time!
  • 2010 Catalog 2010 Catalog Download out 2010 catalog and see all the parts and accessories Pace Performance has to offer!

Reader's Rides Terms Of Use

  • Reader's Rides Terms Of Use

    Last Updated: October 28, 2013

    1) GENERAL

    Pace Performance offers the service of Reader's Rides to its visitors, users, and customers. By and through Reader's Rides, Pace Performance provides services including but not limited to: posting of user generated content, classified advertising, classified content, exchange of privately owned material, distribution of property, access to forums, and private messaging services. By accessing and using the Reader's Rides service, you accept and agree to be bound by the terms and provisions of this agreement as a legal contract between you and Pace Performance. In addition, when using the Pace Performance website and any of its services by and through Reader's Rides, you shall be subject to any posted guidelines or rules applicable to such services, which may be posted, modified, changed, removed or added at any time on either Pace Performance or Reader's Rides. Pace Performance may post changes to this Terms of Use at any time, and any such changes will be applicable to all subsequent access to or use of the Reader's Rides service by and through Pace Performance. All such guidelines or rules are hereby incorporated by reference into this Terms of Use.

    Any participation in using the Reader's Rides service will constitute acceptance of this agreement. If you do not agree to abide by the above, please do not use this site. If you do not accept and agree to all provisions of this Terms of Use agreement, now or in the future, you may reject the Terms of Use by immediately terminating all access and use of Reader's Rides through Pace Performance, in which case any continuing access or use of Reader's Rides is unauthorized.

    You are also required to comply with, and to ensure compliance with, all laws, ordinance and regulations applicable to your activities on the Reader's Rides service.

    Reader's Rides is intended and designed for users 18 years of age and older, and access or use by anyone younger is not authorized.

    This Terms of Use grants you a limited, revocable, nonexclusive license to access the Reader's Rides service Pace Performance provides, and use Reader's Rides, in whole or in part, to post content that includes, but is not limited to, user generated content and classified advertisements, solely in compliance with the Terms of Use.

    2) MODERATION

    Pace Performance has the right, but not the obligation, to regulate any content posted on the Reader's Rides service by users, which includes but is not limited to postings, text, code, images, video, binary files, ads, accounts, account information, flags, emails, messages and any other user communications content posted to, stored on or transmitted via Reader's Rides by any user (or any other third party in any manner); to regulate conduct (including but not limited to any authorized or unauthorized access to or use of Reader's Rides) by any user (or any other third party in any manner); and to enforce the Terms of Use for any reason and in any manner or by any means that Pace Performance, in their sole discretion, deems necessary or appropriate (including but not limited to automated and manual screening, blocking, filtering, exclusions from any pages or all pages, exclusion from search results, image search results, private listings, requiring the use of an application programming interface (API), requiring the use of a bulk posting interface, authorization, verification, and the deletion and/or termination of content, accounts and/or all or any use or access). Pace Performance may, in its sole discretion and without notice to any user start, stop, modify, change, delete, or regulate and enforce measures deemed appropriate by Pace Performance at any time without user consent.

    Pace Performance’s action or inaction to regulate user generated content or conduct or to enforce against any potential violation of the Terms of Use by any user (or any third party) does not waive Pace Performance’s right to implement or not implement regulation or enforcement measures with respect to any subsequent or similar content, conduct, or potential Terms of Use violation.

    You also understand and agree that any action or inaction by Pace Performance or any of its directors, officers, stockholders, employees, consultants, agents, moderators, administrators, affiliates or representatives (collectively Pace Performance Representatives) to prevent, restrict, redress, or regulate content, or to implement other enforcement measures against any content, conduct, or potential Terms Of Use violation is undertaken voluntarily and in good faith, and you expressly agree that neither Pace Performance or Pace Performance Representatives shall be liable to you or anyone else for any action or inaction to prevent, restrict, redress, or regulate content, or to implement other enforcement measures against any content, conduct, or potential violation of the Terms of Use.

    Although Pace Performance and Pace Performance Representatives may moderate content, conduct and Terms of Use compliance on Reader's Rides at Pace Performance’s discretion, Pace Performance and Pace Performance Representatives have no authority to make binding commitments, promises, or representations to anyone that they or anyone else on behalf of Pace Performance will “take care of” or process any alleged problem or complaint, or that they or anyone else on behalf of Pace Performance will otherwise stop, cure, or prevent any problem, content, conduct or purported Terms of Use violation from occurring or recurring on Reader's Rides. Accordingly, you further agree that any representation (written or verbal) by any Pace Performance or Pace Performance Representative (or by anyone else acting on behalf of Pace Performance or by anyone purportedly acting on behalf of Pace Performance that Pace Performance (including but not limited to any Pace Performance Representatives, anyone else acting on behalf of Pace Performance, or anyone purportedly acting on behalf of Pace Performance would or would not prevent, restrict, redress or regulate content (including without limitation, screen, block, moderate, review, remove, terminate, delete, edit, or otherwise stop, cure or exclude any content), or to implement other enforcement measures against any content, conduct, or potential or purported Terms of Use violation is superseded by this provision and is non binding and unenforceable. Specifically, you agree that Pace Performance, Pace Performance Representatives, and anyone else authorized to act on behalf of Pace Performance shall in no circumstance be liable as a result of any representation that Pace Performance, a Pace Performance Representative or anyone else on behalf of Pace Performance would or would not restrict or redress any content, conduct, or potential or purported Terms of Use violation posted on Reader's Rides.

    Pace Performance also has the right in its sole discretion to limit, modify, interrupt, suspend, or discontinue all or any portions of Reader's Rides at any time without notice. Pace Performance and Pace Performance Representatives shall not be liable for any such limitations, modification, interruptions, suspensions, or discontinuance, or any purported losses, harm or damages arising from or related thereto.

    3) CONTENT AND CONDUCT

    a. Content

    Pace Performance does not control, is not responsible for, and makes no representations or warranties with respect to any user content posted on Reader's Rides. You agree, as a user of Reader's Rides, that you are solely responsible for your access to, use of, and /or reliance on any user content. You must conduct any necessary, appropriate, prudent, or judicious investigation, inquiry, research and due diligence with respect to any user content. Any content posted on Reader's Rides may not reflect the same principles, values, ideas, or opinions held by Pace Performance or Pace Performance Representatives.

    You are also responsible for any content and classifieds that you post or transmit on Reader's Rides and, if you create an account, you are responsible for all content posted or transmitted through or by use of your account.

    Content prohibited from Reader's Rides includes but is not limited to: illegal content, content in facilitation of the creation, advertising, distribution, provision or receipt of illegal goods or services, offensive content (including, without limitation, defamatory, threatening, hateful or pornographic content), content that discloses another’s personal, confidential or proprietary information, false or fraudulent content (including but not limited to false, fraudulent, or misleading responses to user ads transmitted via Reader's Rides, malicious content (including, without limitation, malware or spyware), content that offers, promotes, advertises, or provides links to posting or auto-posting products or services, account creation or auto-creation products or services, flagging or auto flagging products or services, bulk telephone numbers, or any other product or service that if utilized with respect to Pace Performance would violate these Terms of Use or Pace Performance’s other legal rights, and content that offers, promotes, advertises, or provides links to unsolicited products or services. Other content prohibitions are set forth in guidelines for particular categories or services on Pace Performance and all such prohibitions are expressly incorporated into these Terms of Use as stated in section 1 above.

    You automatically grant and assign to Pace Performance, and you represent and warrant that you have the right to grant and assign to Pace Performance, a perpetual, irrevocable, unlimited, fully paid, fully sub-licensable (through multiple tiers), worldwide license to copy, perform, display, distribute, prepare derivative works from (including, without limitation, incorporating into other works) and otherwise use any content that you post on Reader's Rides. You also expressly grant and assign to Pace Performance all rights and causes of action to prohibit and enforce against any unauthorized copying, performance, display, distribution, use or exploitation of, or creation of derivative works from, any content that you post (including but not limited to any unauthorized downloading, extraction, harvesting, collection or aggregation of content that you post).

    You agree to indemnify and hold Pace Performance and Pace Performance Representatives harmless from and against any third-party claim, cause of action, demand or damages related to or arising out of: (a) content that you post or transmit (including but not limited to content that a third-party deems defamatory or otherwise harmful or offensive); (b) activity that occurs through or by use of your account (including, without limitation, all content posted or transmitted); (c) your use of or reliance on any user content; and (d) your violation of the Terms Of Use. This indemnification obligation includes payment of any attorneys' fees and costs incurred by Pace Performance or Pace Performance Representatives.

    b. Conduct

    Pace Performance does not control, is not responsible for and makes no representations or warranties with respect to any user or user conduct on Reader's Rides. You are solely responsible for your interaction with or reliance on any user or user conduct. You must perform any necessary, appropriate, prudent or judicious investigation, inquiry, research and due diligence with respect to any user or user conduct.

    You are also responsible for your own conduct and activities on, through or related to Reader's Rides, and, if you create an account on Reader's Rides, you are responsible for all conduct or activities on, through or by use of your account.

    You agree to indemnify and hold Pace Performance and Pace Performance Representatives harmless from and against any third-party claim, cause of action, demand or damages related to or arising out of your own conduct or activities on, through or related to Reader's Rides or Reader's Rides Representatives, and related to or arising out of any conduct or activities on, through or by use of your Reader's Rides account, if any. This indemnification obligation includes payment of any attorneys' fees and costs incurred by Pace Performance or Pace Performance Representatives.

    4. POSTING AND ACCOUNTS

    a. Postings

    Users may not circumvent any technological measure implemented by Pace Performance or Reader's Rides to restrict the manner in which content may be posted on Reader's Rides or to regulate the manner in which content (including but not limited to email) may be transmitted to other users. This prohibition includes, without limitation, a ban on the use of multiple email addresses (created via an email address generator or otherwise); the use of multiple IP addresses (via proxy servers, modem toggling, or otherwise); automating or outsourcing the account creation or login process; multiple and/or fraudulent Reader's Rides accounts, including phone-verified accounts; URL shortening, obfuscation or redirection; use of multiple phone lines or phone forwarding for verification; and content obfuscation via HTML techniques, printing text on images, inserting random text or content "spinning."

    It is expressly prohibited for any third party to post content to Reader's Rides on behalf of another. Users must post content only on their own behalf, and may not permit, enable, induce or encourage any third party to post content for them.

    It is expressly prohibited to post content to Reader's Rides using any automated means. Users must post all content personally and manually through all steps of the posting process. It is also expressly prohibited for any user to develop, offer, market, sell, distribute or provide an automated means to perform any step of the posting process (in whole or in part). Any user who develops, offers, markets, sells, distributes or provides an automated means to perform any step of the posting process (in whole or in part) shall be responsible and liable to Reader's Rides for each instance of access to Reader's Rides (by any user or other third party) using that automated means.

    Affiliate marketing is expressly prohibited on Reader's Rides. Users may not post content or communicate with any Reader's Rides user for purposes of affiliate marketing or in connection with any affiliate marketing system, scheme or program in any manner or under any circumstance.

    b. Accounts

    A user may maintain and use no more than one account to post content. A user specifically may not create or use additional accounts for the purpose of circumventing technological restrictions (security measures) in the posting process or otherwise for posting content in violation of the Terms Of Use.

    A user may create an account only on his/her own behalf. A user must not permit, enable, induce or encourage others to create accounts for him/her. The creation of accounts for others is expressly prohibited.

    A user must only use his/her own account and may not use any account of another.

    The purchase and sale of accounts is expressly prohibited.

    A user must create his/her account personally and manually and may not create accounts by any automated means.

    c. Flagging

    A user shall not "flag" (or otherwise seek removal of) content on Reader's Rides without a personal, good-faith belief that the content violates the Terms Of Use. A user may flag content only on his/her own behalf. A user must not permit, enable, induce or encourage others to flag content for them. A user must not flag content for others.

    A user flagging content must do so manually and may not employ any automated means, products (including, without limitation, software programs) or services to flag content. A user must not circumvent any technological restrictions (security measures) in the flagging process. Without limitation, this prohibition includes a ban on the use of multiple IP addresses for flagging (by use of proxy servers or any means whatsoever).

    5. UNAUTHORIZED ACCESS AND ACTIVITIES

    This section 5 applies to all uses and users of Reader's Rides, unless Pace Performance has specifically authorized an exception to a particular term for a particular user in a written agreement. Pace Performance has sole and absolute discretion to authorize or deny any exception or exceptions to the terms in this section 5.

    To maintain the integrity and functionality of Reader's Rides for its users, access to Reader's Rides and/or activities related to Reader's Rides that are harmful to, inconsistent with or disruptive of Reader's Rides and/or its users' beneficial use and enjoyment of Reader's Rides are expressly unauthorized and prohibited.

    Any copying, aggregation, display, distribution, performance or derivative use of Reader's Rides or any content posted on Reader's Rides whether done directly or through intermediaries (including but not limited to by means of spiders, robots, crawlers, scrapers, framing, iframes or RSS feeds) is prohibited. As a limited exception, general purpose Internet search engines and noncommercial public archives will be entitled to access Reader's Rides without individual written agreements executed with Pace Performance that specifically authorize an exception to this prohibition if, in all cases and individual instances: (a) they provide a direct hyperlink to the relevant Reader's Rides website, service, forum or content; (b) they access Pace Performance from a stable IP address using an easily identifiable agent; and (c) they comply with Pace Performance robots.txt file; provided however, that Pace Performance may terminate this limited exception as to any search engine or public archive (or any person or entity relying on this provision to access Reader's Rides without their own written agreement executed with Pace Performance), at any time and in its sole discretion, upon written notice, including, without limitation, by email notice.

    Any access to or use of Reader's Rides to design, develop, test, update, operate, modify, maintain, support, market, advertise, distribute or otherwise make available any program, application or service (including, without limitation, any device, technology, product, computer program, mobile device application, website, or mechanical or personal service) that enables or provides access to, use of, operation of or interoperation with Pace Performance (including, without limitation, to access content, post content, cross-post content, re-post content, respond or reply to content, verify content, transmit content, create accounts, verify accounts, use accounts, circumvent and/or automate technological security measures or restrictions, or flag content) is prohibited. This prohibition specifically applies but is not limited to software, programs, applications and services for use or operation on or by any computer and/or any electronic, wireless and/or mobile device, technology or product that exists now or in the future.

    If you access Reader's Rides or copy, display, distribute, perform or create derivative works from Reader's Rides webpages or other Reader's Rides intellectual property in violation of the Terms Of Use or for purposes inconsistent with the Terms Of Use, your access, copying, display, distribution, performance or derivative work is unauthorized. Circumvention of any technological restriction or security measure on Reader's Rides or any provision of the Terms Of Use that restricts content, conduct, accounts or access is expressly prohibited. For purposes of this paragraph, you agree that cached copies of Reader's Rides webpages on your computer or computer server constitute "copies" under the Copyright Act, 17 U.S.C. § 101.

    Any effort to decompile, disassemble or reverse engineer all or any part of Reader's Rides in order to identify, acquire, copy or emulate any source code or object code is expressly prohibited.

    Any activities (including but not limited to posting voluminous content) that are inconsistent with use of Reader's Rides in compliance with the Terms Of Use or that may impair or interfere with the integrity, functionality, performance, usefulness, usability, signal-to-noise ratio or quality of all or any part of Reader's Rides in any manner are expressly prohibited.

    Any attempt (whether or not successful) to engage in, or to enable, induce, encourage, cause or assist anyone else to engage in, any of the above unauthorized and prohibited access and activities is also expressly prohibited and is a violation of the Terms Of Use.

    6. USER COMMUNICATIONS, TRANSACTIONS, INTERACTIONS, DISPUTES AND RELATIONS

    Pace Performance and Pace Performance Representatives are not parties to, have no involvement or interest in, make no representations or warranties as to, and have no responsibility or liability with respect to any communications, transactions, interactions, disputes or any relations whatsoever between you and any other user, person or organization ("your interactions with others"). You must conduct any necessary, appropriate, prudent or judicious investigation, inquiry, research or due diligence with respect to your interactions with others.

    You agree to indemnify and hold Pace Performance and Pace Performance Representatives harmless from and against any third-party claim, cause of action, demand or damages related to or arising out of your interactions with others. This indemnification obligation includes payment of any attorneys' fees and costs incurred by Pace Performance or Pace Performance Representatives.

    7. FEES

    Pace Performance may charge a fee to post content or for other features, products, services or licenses. You are responsible to Pace Performance for any fees applicable to content that you post or other features, products, services or licenses you purchase or that are purchased through your account. You authorize Pace Performance, or its designated payment processor, to charge your specified credit card, debit card or other payment method for such fees.

    Unless otherwise specified, all fees are in United States dollars and all charges will be made in United States dollars. Any applicable sales or other taxes are additional to the stated fee. Currency exchange settlements and foreign transaction fees are based on your agreement with your credit card or other payment method provider.

    Except as required by law, all fees are nonrefundable, including, without limitation, in situations where paid posts are removed by Pace Performance or by community flagging. Payments and purchases may not be canceled by the user, except as required by law. However, Pace Performance reserves the right to refuse or terminate any purchase or attempted purchase at any time in its sole discretion. You understand and agree that if you authorize a payment transaction with your credit card, debit card or other payment method, but your charge is rejected for any reason, there may be a hold on your use of that transaction amount for several days.

    8. DISCLAIMERS

    YOUR ACCESS TO, USE OF AND RELIANCE ON Reader's Rides AND CONTENT ACCESSED THROUGH Reader's Rides IS ENTIRELY AT YOUR OWN RISK. Pace Performance (INCLUDING, WITHOUT LIMITATION, THE WEBSITES, PROGRAMS, SERVICES, FORUMS AND CONTENT ACCESSED THROUGH THE WEBSITES, PROGRAMS, SERVICES AND FORUMS) IS PROVIDED ON AN "AS IS" OR "AS AVAILABLE" BASIS WITHOUT ANY WARRANTIES OF ANY KIND.

    ALL EXPRESS AND IMPLIED WARRANTIES (INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS) ARE EXPRESSLY DISCLAIMED.

    WITHOUT LIMITING THE FOREGOING, Pace Performance ALSO DISCLAIMS ALL WARRANTIES FOR OR WITH RESPECT TO: (a) THE SECURITY, RELIABILITY, TIMELINESS, ACCURACY AND PERFORMANCE OF Reader's Rides AND CONTENT ACCESSED THROUGH Reader's Rides ; (b) COMPUTER WORMS, VIRUSES, SPYWARE, ADWARE AND ANY OTHER MALWARE, MALICIOUS CODE OR HARMFUL CONTENT OR COMPONENTS ACCESSED, RECEIVED OR DISSEMINATED THROUGH, RELATED TO OR AS A RESULT OF Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides ; (c) ANY TRANSACTIONS OR POTENTIAL TRANSACTIONS, GOODS OR SERVICES PROMISED OR EXCHANGED, INFORMATION OR ADVICE OFFERED OR EXCHANGED, OR OTHER CONTENT, INTERACTIONS, REPRESENTATIONS OR COMMUNICATIONS THROUGH, RELATED TO OR AS A RESULT OF USE OF Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides (INCLUDING, WITHOUT LIMITATION, ACCESSED THROUGH ANY LINKS ON Reader's Rides OR IN CONTENT).

    THESE DISCLAIMERS SHALL APPLY TO THE FULLEST EXTENT PERMITTED BY LAW.

    Some jurisdictions do not allow disclaimer of implied warranties. In such jurisdictions, some of the foregoing disclaimers as to implied warranties may not apply.

    9. LIMITATIONS OF LIABILITY

    Pace Performance AND THE Pace Performance REPRESENTATIVES SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY ACCESS TO, USE OF OR RELIANCE ON Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides BY YOU OR ANYONE ELSE, OR FOR ANY TRANSACTIONS, COMMUNICATIONS, INTERACTIONS, DISPUTES OR RELATIONS BETWEEN YOU AND ANY OTHER PERSON OR ORGANIZATION ARISING OUT OF OR RELATED TO Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides , INCLUDING BUT NOT LIMITED TO LIABILITY FOR INJUNCTIVE RELIEF AS WELL AS FOR ANY HARM, INJURY, LOSS OR DAMAGES OF ANY KIND INCURRED BY YOU OR ANYONE ELSE (INCLUDING, WITHOUT LIMITATION, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, STATUTORY, EXEMPLARY OR PUNITIVE DAMAGES, EVEN IF Pace Performance OR ANY Pace Performance REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES). THIS LIMITATION OF LIABILITY APPLIES REGARDLESS OF, BUT IS NOT RESTRICTED TO, WHETHER THE ALLEGED LIABILITY, HARM, INJURY, LOSS OR DAMAGES AROSE FROM AUTHORIZED OR UNAUTHORIZED ACCESS TO OR USE OF Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides ; ANY INABILITY TO ACCESS OR USE Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides ; OR ANY REMOVAL, DELETION, LIMITATION, MODIFICATION, INTERRUPTION, SUSPENSION, DISCONTINUANCE OR TERMINATION OF Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides.

    THESE LIMITATIONS SHALL ALSO APPLY WITH RESPECT TO DAMAGES RESULTING FROM ANY TRANSACTIONS OR POTENTIAL TRANSACTIONS, GOODS OR SERVICES PROMISED OR EXCHANGED, INFORMATION OR ADVICE OFFERED OR EXCHANGED, OR OTHER CONTENT, INTERACTIONS, REPRESENTATIONS, COMMUNICATIONS OR RELATIONS THROUGH, RELATED TO OR AS A RESULT OF Reader's Rides OR CONTENT ACCESSED THROUGH Reader's Rides (INCLUDING, WITHOUT LIMITATION, ANY LINKS ON Reader's Rides AND LINKS IN CONTENT ACCESSED THROUGH Reader's Rides).

    You hereby release Pace Performance and each of the Pace Performance Representatives, and their respective subsidiaries, affiliates, successors, predecessors, assigns, heirs, service providers and suppliers, from all claims, demands and damages of every kind and nature, known and unknown, direct and indirect, suspected and unsuspected, disclosed and undisclosed, arising out of or in any way related to Reader's Rides or content accessed through Reader's Rides, or any interactions with others arising out of or related to Reader's Rides or content accessed through Reader's Rides, and you expressly waive the provisions of California Civil Code Section 1542 (and any similar laws in other jurisdictions), which provides: "A general release does not extend to claims which the creditor does not know or suspect to exist in his favor at the time of executing the release, which, if known by him must have materially affected his settlement with the debtor."

    THESE LIMITATIONS SHALL APPLY TO THE FULLEST EXTENT PERMITTED BY LAW.

    10. INJUNCTIVE RELIEF

    You acknowledge and agree that any violation or breach of the Terms Of Use may cause Pace Performance immediate and irreparable harm and damages; consequently, notwithstanding any other provision of the Terms Of Use or other applicable legal requirements, Pace Performance has the right to, and may in its discretion, immediately obtain preliminary injunctive relief (including, without limitation, temporary restraining orders) and seek permanent injunctive relief regarding any violation or breach of the Terms Of Use. In addition to any and all other remedies available to Pace Performance in law or in equity, Pace Performance may seek specific performance of any term in the Terms Of Use, including but not limited to by preliminary or permanent injunction.

    11. DAMAGES

    In addition to any injunctive relief, you agree to pay to Pace Performance the total amount of all actual damages (including but not limited to direct, indirect, consequential and incidental damages) caused by any violation of the Terms Of Use for which you bear responsibility; EXCEPT you acknowledge that, for certain Terms Of Use violations, actual damages would be extremely difficult or impossible to quantify. Consequently, for such Terms Of Use violations, you agree to pay liquidated damages to Pace Performance.

    Furthermore you agree that the amounts of liquidated damages assessed and decided upon by Pace Performance are reasonable estimates of Pace Performance damages for such violations, and that liquidated damages for violations of the Terms Of Use are and will be cumulative.

    13. PRIVACY

    Any personal and/or private information that Pace Performance and/or Reader's Rides collects which includes, but is not limited to, names, addresses, phone numbers, e-mail addresses, IP addresses, and access dates and times will not be shared with any third party company, organization, or any other external entity. You agree that any and all personal and/or private information provided to Pace Performance and/or Reader's Rides is done so by your own discretion and consent. Personal information is collected during the sign-up process and is used to differentiate you from other users of Reader's Rides.

    Furthermore, you agree that Pace Performance has your full consent to collect and use any and all personal and/or private information that is provided to Reader's Rides. Pace Performance will not disclose personal information collected about you, except for certain explicit circumstances in which disclosure is required by law. Examples of this include but are not limited to if personal information is requested by a court of law, law enforcement, or government organizations. Pace Performance will not distribute or sell personal information to third-party organizations.

    If you do not wish for Pace Performance to collect your personal and/or private information and want to prohibit Pace Performance from collection and using your personal and/or private information you must not enter your personal and/or private information into any form of collection processes that Reader's Rides utilizes, which include but are not limited to, intake forms, weblogs, surveys, web forms, registration forms, newsletter sign ups, and order placement forms. You also agree that any and all information entered into Reader's Rides is true and correct, and that you are not using information that belongs to another person, company, individual, or organization.

    Pace Performance servers collect the following information which is not limited to, Internet Protocol (IP) addresses, web pages visited, referring web pages, browsers used, dates and times of access, and user log-in information. Pace Performance does not associate this data to individual user identities. This information is used to improve web presentation and utilization. IP address information may also be used for troubleshooting purposes. Pace Performance uses “cookies” in order to deliver web content specific to individual users’ interests and/or to keep track of online purchasing transactions. Sensitive personal information is not stored within cookies.

    Pace Performance and/or Reader's Rides uses webforms on this site. Web forms require users to give contact information that includes but is not limited to, full names, addresses, phone numbers, and e-mail addresses. Contact information from the registration form is used only to send material relating to the purpose for which it was collected and will not be sold to another party. Pace Performance will only use personal information collected from this site for the purpose of communication back to individuals who contact us via the site.

    14. MISCELLANEOUS

    These Terms Of Use constitute the entire agreement between you and Pace Performance and supersede any prior written or oral agreement. Other than the Pace Performance Representatives (who are expressly included as named third-party beneficiaries of the Terms Of Use), there are no third-party beneficiaries to the Terms Of Use.

    Any and all claims, causes of action or disputes (regardless of theory) between you and Pace Performance arising out of or related to the Terms Of Use, Pace Performance or content accessed through Reader's Rides shall be classified as null and void through this Terms of Use. By having registered to Pace Performance and/or Reader's Rides you agree to never file any form of legal suit against Pace Performance or any Pace Performance Representative.

    15. FEEDBACK

    Comments on these Terms Of Use are welcome and should be sent to the Pace Performance feedback email: Parts@PacePerformance.com

Specials & Vendor Rebate Page

Vendor Links

  • Abbott Abbott Cables
  • Accel Accel Ignition Controls, Coils, Wire Sets, Distributors
  • Aeroforce Aeroforce Measure performance, fuel economy, and read and clear trouble codes. It does it all and looks great too! Simply plug into your diagnostic port to display just about anything you'd want to know about your vehicle.
  • Airaid Airaid Premium Air Filters, Intake Systems, Modular Intake Tubes, Throttle Body Spacers
  • ARP ARP Bolts, Studs
  • Auto Meter Auto Meter Gauges, Mounting Panels and Cups, Pods
  • Auto Tap Auto Tap AutoTap
  • B&M Racing & Performance B&M Racing & Performance Shifters
  • Be Cool Be Cool Aluminum Radiators, Module Assemblies, Fans, Fan Modules, Accessories
  • Busted Knuckle Garage Busted Knuckle Garage Apparel & Accessories
  • CarTech CarTech Automotive Books and Manuals
  • Caspers Electronics Caspers Electronics Electrical Specialty Items
  • COMP Cams COMP Cams Cams, Rocker Arms, Valve Springs
  • Competition Engineering Competition Engineering Rear Frame Kits, Frame Rails & Components, Driveshaft Loops, Ladder Bars & Accessories, Control Arms & Accessories, Rear Axle Housing & Accessories, Shocks & Springs, Wheel-E-Bars, Roll Bars & Cages, Front Suspension Components, Engine Limiters & Trans. Crossmembers, Fasteners, Brackets
  • Currie Currie Racing Rearends
  • Earl's Earl's AN Plumbing & Fitting
  • Edelbrock Edelbrock Air Cleaners, Camshaft/Lifter Kits, Carburetors, Crate Engines, Cylinder Heads, Exhaust Systems, Fuel Injection, Intake Manifolds, Nitrous Systems, Shock Absorbers, Suspension Components, QwikData, Valve Covers
  • Flex-a-lite Flex-a-lite Flex Fans, Anodized Belt Fans, High Performance Electric Fans, Low-Profile Electric Fans, Engine Oil Coolers, Transmission Oil Coolers & Accessories, Remote Oil Coolers
  • Flowtech Flowtech Exhaust Headers
  • Fluidampr Fluidampr Fluid Filled Balanders
  • G2 G2 Epoxy based engine and caliper paint
  • Gearhead Planet Gearhead Planet T-Shirts
  • Hays Hays Performance & Racing Clutches, Flywheels, Discs, Clutch Accessories
  • Heatshield Products Heatshield Products Heat shield insulation, exhaust wrap, header wrap, turbo heat shield insulation, heat shield tape, thermal wire protection, oven thermal insulation, gaskets, expansion joints, and other industrial thermal insulation.
  • Hedman Hedman Hedders, Exhaust Crossover Systems, Performance Mufflers, Exhaust Tips
  • Holley Holley Carburetors, Fuel Pumps, Intake Manifolds
  • Hooker Hooker Exhaust Headers
  • Hughes Performance Hughes Performance Converters, Transmissions, Components
  • Hurst Shifters Hurst Shifters Transmission Controls & Accessories
  • Innovate Motorsports Innovate Motorsports Digital Tuning Tools
  • Jacobs Electronics Jacobs Electronics Ignition Systems
  • K&N Filters K&N Filters Air & Oil Filters, Intake Kits
  • Lakewood Lakewood Bellhousings & Accessories, Transmission Adapters, Traction Bars, Rear Traction Control Arms, Driveshaft Safety Loops, Drag Shocks & Struts, Transmission Mounts, Universal Joints
  • Lokar Lokar Shifters, Emergency Brakes and Cables, Column Shift Linkage, Throttle Cables and Kickdowns, Transmission & Engine Dipsticks, Indicators & Boots, Brake Pedals
  • Lunati Lunati Camshafts
  • Made For You Made For You Fasteners, T-Clamps, Wire Looms
  • Mallory Ignition Mallory Ignition Distributors, Caps & Tune-up Parts, Ignition Systems & Coils, Spark Plug Wire Sets, Fuel System Products, Magnetos
  • Mast Motorsports Mast Motorsports Performance LSx Engines
  • Moroso Moroso Oiling System Equipment, Transmission Pans & Accessories, Fasteners, Tools, Cooling System Parts, Pulleys, Fuel System Equipment, Air Cleaners, Valve Covers, Ignition Wires & Systems, Electrical System Equipment, Rear Axle Equipment, Sheet Metal & Body
  • Mr. Gasket Mr. Gasket Gaskets, Fasteners, Chrome plated accessories, Engine components, Carburetor adapters and spacers, Cooling system products, Suspension components, Fuel system accessories.
  • Nitrous Express Nitrous Express Complete Nitrous Kits, accessories
  • Painless Performance Painless Performance http://painlessperformance.com/
  • Richmond Richmond Ring and Pinion, Transmissions, Gear Oil
  • Penguin Penguin Automotive Books
  • PIAA PIAA Lighting
  • Performance Stainless Steel Performance Stainless Steel V8 Engine Fittings
  • Powermaster Powermaster Chrome Alternators & Starters, Hi Amp Alternators & Starters
  • Powertrax Powertrax Traction Systems
  • Proform Proform Starters, Carburetors, Alternators, Valve Covers, Water Pumps, Distributors, Engine Building Tools, RPM Shift Lights & Tachs, Water Pumps, Electric Fans, Rocker Arms
  • PRW PRW Rocker Arms, Flexplates, Flywheels, High Performance Water Pumps, Dampers, Rockers, Guide Plates
  • Putco Putco Truck & SUV Accessories
  • Ralph White Ralph White Apparel & Accessories
  • RAM RAM Clutch & Flywheels
  • Royal Purple Royal Purple Motor Oil
  • Russell Russell Hoses, Adapter Fittings, Fuel Management Systems, Brake Lines & Components, Engine & Plumbing Accessories
  • Stage 8 Stage 8 Locking Bolt Fasteners
  • SSBC SSBC Disc Brake Kits & Accessories
  • Street & Performance Street & Performance Throttle Body Spacers, Spiral Flow Intakes, Manifold Spacers, Ignition Coil Dress-Up Covers, Valve Cover Risers
  • Superchips Racing Superchips Racing Automotive Tuning
  • Taxor Taxor Watches & Clocks
  • Trans Dapt Trans Dapt Oil Pans, Valve Covers, Spacers, Motor Mounts, Differential Covers, Oil Filtration Products Chrome & Aluminum Customizing Accessories
  • Tuff Stuff Tuff Stuff Starters, Water Pumps, Alternators, Compressors, Power Steering Pumps, Master Cylinders, Brake Boosters, Accessories
  • Tuff Stuff Tuff Stuff Starters, Water Pumps, Alternators, Compressors, Power Steering Pumps, Master Cylinders, Brake Boosters, Accessories
  • V-Tech V-Tech Tail Light Covers, Mirror Covers
  • Weiand Weiand Intake Manifolds, Water Pumps, Supercharger Kits
  • World Products World Products Engine Blocks, Cylinder Heads